This genius tool makes flashing the Atmel Atmega MCU found in many ESCs or other devices using Atmega processors a walk in the park. No need to solder or create cumbersome clip on devices, simply connect the socket flashing tool to a USBasp AVR device and place the socket over the exposed Atmel MCU!
Unique and exclusive to Hobbyking this handy device will become a favorite in your DIY arsenal.
High point precision.
Wide range of applications.
Quick and easy, no soldering required.
Pointing accuracy : ± 0.05 mm
Spring force: [ ±20%]
17.0g(0.593oz) at initial travel
40.0g(1.418oz) at 1.70mm(0.0669) recommended travel
52.0g(1.827oz) at 2.50mm(0.0984) full travel
Socket : Phosphor Bronze / Gold Plated
Plunger : Hardened Beryllium copper / Gold Plated
Barrel : Phosphor Bronze / Gold Plated
Spring : Music Wire / Gold Plated
Housing : LG chem ABS-AF312
Cable length: 420mm
USBasp AVR Programming Device for ATMEL proccessors
Suits the Following MCU:
Atmel Atmega8, Atmega48, Atmega88, Atmega168, Atmega328
Hmotnost ( g )
a must have for updating your ESC's and very easy to useVery great and helpful tool! Get someone else to hit enter!poorly made managed to flash 4 ESC's. It stopped working. I thought I'll just replace it but the price has tripled. DON"T waste your moneyReally good flashing connector, easy to use and good quality, i recommend this to anyone!.. thanks HK!,Expensive ... but I could not find anywhere else.My tool had a wrong pin connection !! ground pin was wired to wrong pin on usbasp header :( i had to cut the heatshrink and resolder to the correct pin.
Sending it back would have cost me more then repairing it myself. to bad....
great product, good instructional videoGreat product. Does exactly what it should do, used it to flash my spider opto 30A esc. No issues with flashing and it fit perfectly onto the chip. Don't forget to buy the adapter for the usb cable, you wont be able to hookup to your PC without it.Indispensabile per esc, turnigy multistar da flashare assolutamente.Worked great for first esc,
One of the sliding pins cracked on the inside. wires are caulked on the back of the plastic, two piece body. Unserviceable, and very fragile.
Save your $$$, build your own flash interface. That's what I have to do now, what a waste or 25 bucks.
No File Name download now [48kb] Tool orientation download now [226kb] flashing list download now [304kb] Flashing your ESCs download now [4099kb] List of compatible ESC's and hex files download now [250kb] Atmel 6-10pin diagram download now [61kb] 10-6 Adapter Layout (Connect old 10p fla download now [85kb] Setup on win 8.1 download now [0kb] Picture of adapter pinouts with labels download now [76kb] Picture of USBasp pinout with labels download now [97kb]