Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat

Birdie 30A Brushless ESC w/ 2A BEC

Birdie 30A Brushless ESC w/ 2A BEC

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Váha:
36 g
SKU:
BIRD-30A
Popis
produktu

The Birdie range of ESCs are.. well.. CHEEP! CHEEP!

No frills (or feathers) here, just great value for money! Each and every Birdie ESC is QC checked by Hobbyking and placed under a 2 minute load test ensuring your Birdie will be ready to fly!

If your looking for an ESC with basic features and reliability at a bargain price you better bag a Birdie before they all fly the coop!

Specs.
Weight: 25g
Size: 60x26x8mm
Cells: 2-3S
Max Current: 25A
Burst Current: 30A
BEC: 2A / 5v

Programming Options
Cell Type: Lipoly/NiMH
Brake: Enable/Disable

Product
Specifications

Další informace

  • SKU:
    BIRD-30A
  • Brand:
    nedefinováno
  • Kapacita ( mAh )
    Ne
  • Hmotnost ( g )
    36.00
  • Délka:
    143.00
  • Width:
    10.00
  • Výška
    75.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good ESC, But Watch out if you modify them with SimonK's firmware the Motor wires are not isolated and can be easily shorted by the heatsink!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great ESC, although it's not really 30A, but we're used to that from Birdie.



25A MAX, 30A 10 second burst, and it heats up pretty good :)



I opened my Bixler up a bit to get the airflow and now it's great.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used this ESC to replace a 30amp eflite esc that blew in my parkzone SE5a.

Birdie ESC was easy to fit and did not have to be re-programed. Model flys very smothly with this new ESC.

Overall im very happy with it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Turnigy D2820/14 with Birdy30 ESC, testet now for about 1 year in my Alpha Spitfire, Prop 7x4 Wood, 1300mAh 3S Lipo, runs perfect
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Speed control barato, e muito bom, otimo custo/beneficio, para aeromodelos em depron uma beleza. Recomendo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works very fine with D2822/14 Brushless Outrunner 1450kv and 7x4 Prop in my 80cm Depron Alpha Spitfire
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have few of these. They are OK ESC's but be aware! The shipped ones may not have the same programming options as stated above. You can not pull 2A from BEC but you can pull 1A (normally you will need like 0.2A).

One I got had short circuit between and -.

It is old design and heavy because of extra (useless) cooling plate.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just got this. Hooked it up to the receiver and battery to center the servos. Started to make that tell-tale smell when electronics are going bad (like a short). Something must have come out either end of the shrink tube as it left a stain on the foam board. Smoke? I didn't see as it was out of my view. Didn't even seem to detect 3 cells on the battery at first. It does now, but the throttle response is terrible. Stutters terribly, especially at lower throttle. This is hooked up to a park 450 1050kv. With another ESC, the motor is fine. Impossible to return, unfortunately. Wish the plush 30s had been in stock.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good ESC. Works very smooth with 2610 motor. There's one trick about it: it has 2 heat sinks. So if you plan to glue it inside edf duct it's not a good idea because the other heat sink which is under the sticker (for BEC I believe) will overheat. It has to be placed such that air circulates from both sides.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good esc. My motors make top speed :D
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Programming manual download now [88kb]

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').