Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

Turnigy MultiStar 30A BLHeli-S Rev16 V3 ESC 2~4S (Opto)

Turnigy MultiStar 30A BLHeli-S Rev16 V3 ESC 2~4S (Opto)

QTY:

Now save Uložit 0,00 € 0,00 €

10,38 €
Rating:

Stock:
Váha:
16 g
SKU:
9351000087-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu

Turnigy MultiStar BLHeli-S Rev16 ESC's are the latest generation of speed controllers designed specifically for multirotors (drones). They are super simple to install and very easy to set up. 

These ESC's have superior performance and utilise hardware generated motor PWM for smooth throttle response. Another feature of these ESC's is Oneshot125 which is a faster communication protocol between the flight controller and the ESC on your multirotor. It allows the flight controller to send commands to the motor quicker allowing faster acceleration, regenerative braking and active freewheeling.

The BLHeli-S Rev16 30A has masses of programming parameters (see the list below) and can be programmed easily from your transmitter or using the MultiStar programming card. The ESC comes pre-tinned and solder ready, all you need to do is solder the supplied wires to the ESC and then add the plugs/sockets of your choice. With its small lightweight design, these ESC's will have you racing faster without breaking the bank.

These ESCs can be flashed with the latest DShot150 and DShot300 firmware.

Features:
• Small and lightweight (only 9.1g)
• S code for superior performance
• Smooth and linear control
• Oneshot125 for rapid throttle response
• Compatible with DShot150 and DShot300 firmware
• Regenerative braking
• Active freewheeling
• Beacon functionality
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)
• Thermal protection

Programming Parameters:
• Startup power
• Commutation timing
• Demag compensation
• Rotation direction
• Beep strength
• Beacon strength
• Beacon delay
• Throttle range
• Thermal protection
• Low RPM power protection
• Brake
• LED control

Specs:
Constant Current: 30A
Peak Current: 35A
Input Voltage: 2~4S (7.4~14.8V)
BEC: None
Dimensions: 28 x 13mm
Weight: 9.1g

Product
Specifications

Další informace

  • SKU:
    9351000087-0
  • Brand:
    MultiStar
  • Hmotnost ( g )
    16.00
  • Délka
    102.00
  • Width:
    6.00
  • Výška:
    94.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I use these on my S500 quad with multistar 2216-800 motors. They are a bit overkill for my setup, but I wanted to reuse them when I upgrade to a bigger hex. They work flawlessly on the price is good as well!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').