The BMS-2514 is a High Voltage (7.4V) Coreless Digital Servo featuring Titanium gears and an Alu heat sink case. The BMS-2514 includes a heavy duty servo horn set.
Weight: 69 grams
Dimensions: 40.5 x 20 x 39 mm
Torque @ 6V: 27.1 kg/cm
Torque @ 7.4V: 33.2 kg/cm
Speed @ 6V: 0.16sec / 60 deg at no load
Speed @ 7.4V: 0.13sec / 60 deg at no load
Alu Heat Sink Case
Dual Ball Bearing
JR style connector
Compatible with 2s Lipoly (7.4v), 6 cell Nimh & 2 cell A123 (6.6v).
The The BMS-2514 is High performance servo manufactured in Taiwan and recommended for all applications.
Hmotnost ( g )
Rychlost ( Sec / 60deg )
Točivý moment ( kg) (min . 0,01 kg )
Unit Weight (g):
A ( mm ):
B ( mm )
C ( mm )
D ( mm ):
E ( mm ):
F ( mm )
Its no titanim gear . Power gear broke - It is aluminim or other soft material. I crash 2,2m model.This servo are dead after 6 onths on my little axial scx10.
Pinion hs...not good quality like savor..
servo de muy buenas cualidades , se puede conectar a 7,4 v , espero que me cumpla con lo descrito en las especificaciones
montado en mi Gmade R1Ok guys I ordered over 8 pcs of these servos for testing purposes and to install in my planes. All 8 were tested under extreme pull stress starting from 12kg/cm to 19.5kg/cm at 7.4V. The servos easily reach 16.4kg/cm without any problems. The issues begin after 20kg/cm, some of the servos began to buzz and not operate properly. They vibrated and did not move smoothly.
I tested electronics and all was well-made. The gears are good and smooth. Overall, the quality of these servos are okay for those who only need 18kg/cm performance, not more.Very fast and powerful. Accurate, a bit more noise than my hitecs. But great quality at a better price.awesome servo, very strong, I replaced a hitec 7950 with this its a hair weaker, i'd compare it to a hitec 7955, so far i'm very happy. it is power hungry, I had a HK3a UBEC and it would overdraw it and the RX would lose bind, I have that BEC with a reciever capacitor and it works fine.It's a very strong and accurate servo.
I've installed it in my traxxas 1/10 summit instead of 2 pre-installed traxxas 2075 servos.
I'm very happy with this servo!