New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

BMS-821DMGplusHS High Performance Digital Servo (Metal Gear) 6.4kg / .11sec / 45g

BMS-821DMGplusHS High Performance Digital Servo (Metal Gear) 6.4kg / .11sec / 45g

Discontinued Product

Please continue searching for a similar product.
SKU:
821DMG-HS
WANT FREE SHIPPING? Click here to find out more!
BMS-821DMG+HS  High Performance Digital Servo (Metal Gear) 6.4kg / .11sec / 45g
With an integral heat-sink, these servos are designed for the demands of competition racing, keeping the motor cool even when the outside temperature is hot and the servo is being overused. With a heavy duty rubber-sealed waterproof case and high-strength horn set, this servo is perfect for high-performance R/C car applications. And the output splines are compatible with aftermarket 25 tooth Futaba horns.
The servo will automatically learn the user's transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality. The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand high temperature without degradation.
The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide.
1. Double M9.6 ball bearing (si-oil)
2. 3 pole high-torque motor with low RF noise (CE certified)
3. Rubber seals for waterproof case
4. Futaba compatible 25 tooth output splines
5. Heavy duty servo case
6. Integral heat sink
7. Digital motor drive with ultra-square PWM signal
8. Automatic determination of servo center pulse width
9. Metal gears of aluminum 6061 material combined with light and strong C95 material
10. Fail-Safe function
11. 2PEW coated motor wire for high-temperature use
12. Digital control IC - SOP package with 12bit data transfer
13. MOS-FET motor driver chips that can handle 7A peak loads
 
 
   
Weight: 45g / 1.60oz
Dimensions: 40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 inch
Torque At 4.8V: 6.4kg/cm , 82 oz/in
Torque At 6.0V: 7.2kg/cm , 112 oz/in
Speed At 4.8V: 0.11 sec / 60° at no load
Speed At 6.0V: 0.09 sec / 60° at no load
  • SKU 821DMG-HS
  • Brand Bluebird
  • Hmotnost 102.0000
  • Délka 90.00
  • Packaging Width 35.00
  • Výška 87.00
  • Točivý moment ( kg) (min . 0,01 kg ) 7.20
  • Rychlost ( Sec / 60deg ) 0.09
  • A ( mm ) 42.00
  • B ( mm ) 41.00
  • C ( mm ) 37.00
  • D ( mm ) 21.00
  • E ( mm ) 55.00
  • F ( mm ) 27.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Ce servo est INUTILISABLE......quand on actionne normalement la commande dans un sens puis dans l'autre, le servo reagit normalement. Mais quand qu'on stoppe la commande, le servo continue de fonctionner d'un sens l'autre, d'une butee vers l'autre sans s'arreter.....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ce servo est INUTILISABLE......quand on actionne normalement la commande dans un sens puis dans l'autre, le servo reagit normalement. Mais quand qu'on stoppe la commande, le servo continue de fonctionner d'un sens l'autre, d'une butee vers l'autre sans s'arreter.....

You don't need external BEC. All you need is a CAPACITOR on the Rx.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

You don't need external BEC. All you need is a CAPACITOR on the Rx.

ATTENTION

These high performance servos are very strong and have a coreless high torque motor that requires a STRONG power source. Many ESCs inbuilt BEC cannot handle such current, and will shut down the Rx.

We advise customers to use an external UBEC when using this servo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ATTENTION

These high performance servos are very strong and have a coreless high torque motor that requires a STRONG power source. Many ESCs inbuilt BEC cannot handle such current, and will shut down the Rx.

We advise customers to use an external UBEC when using this servo.

brian possible probleme pas receteur ni servo..il faut un cable adapteur tension tu peut le trouve ici..la tension des nouveaux recepteur et de 2.7v..possible tros faible pour driver se servo..bonne chance..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

brian possible probleme pas receteur ni servo..il faut un cable adapteur tension tu peut le trouve ici..la tension des nouveaux recepteur et de 2.7v..possible tros faible pour driver se servo..bonne chance..

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save