BMS-A206 MG Digital Mini Servo 3.2kg / 0.05sec / 22.5g
Excelllent choice for mini helicopter tail servo.
Dimensions: 23 x 12 x 27.25mm
Operating Voltage: 4.8~6v
Torque: 2.6kg/cm @ 4.8v, 3.2kg/cm @ 6v
Speed (sec/60 deg): 0.06 @ 4.8v, 0.05 @ 6v
Motor Type: Japan Coreless
Case: Full Aluminum Alloy Case
Lead/Plug: JR Type
Dual Ball Bearing
All Metal Gears
Digital 12-Bits Resolution (4096 steps)
Hmotnost ( g )
Rychlost ( Sec / 60deg )
Točivý moment ( kg) (min . 0,01 kg )
Unit Weight (g):
A ( mm ):
B ( mm )
C ( mm )
D ( mm ):
E ( mm ):
F ( mm )
Use these on my Align 250DFC's and very happy. They're fast and hold rock sold...highly recommend.Amazing servo.
I'm using it for the roll on a ultra light gimbal, and gimbals require the highest requirements from servos. And this meets them all!!
Its fast, strong, and extremely smooth, centers perfectly.
The only issue I had was that the servo is directly connected to the bottom plate, which gives a ratio of 1:1 angle of camera to angle of servo. Since there is just a very little bit of free movement due to the metal gears, the gimbal was oscillating between the 2 lsbs of the 12 bit adc, causing a wobble in the video. So I had to dampen then movement by adding some soft foam between the movements, and now it works perfect.Hi there,
ordered this servo because of need for a super heli tail servo. As I noticed this one is the best quality servo I ever held in hands. No sloop, no shivering, stays cold, super fast and absolute precise. Best choice for perfectionists.