Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global

Case Set For MultiWii PRO Flight Controller And MTK GPS Module

Case Set For MultiWii PRO Flight Controller And MTK GPS Module

QTY:

Now save Uložit 0,00 € 0,00 €

6,69 €
Stock:
Váha:
46 g
SKU:
387000041-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Popis
produktu

The new molded case set for the MultiWii pro and the MTK GPS module is a great way to protect your FC and finish off your install. The case retains full access to the 3 serial ports, inputs, outputs, reset and USB port. The GPS case comes with a 100mm tall pedestal mount and comes with mounting hardware.

This is the perfect accessory to show off and protect your MultiWii Pro 

Specs:
Weight: FC case 13g, GPS case 16g with pedestal
Size FC: 14x52x72mm
Size GPS: 15x53mm Pedestal rod 100mm

Product
Specifications

Další informace

  • SKU:
    387000041-0
  • Brand:
    nedefinováno
  • Hmotnost ( g )
    46.00
  • Délka
    140.00
  • Width:
    20.00
  • Výška:
    60.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
he new molded case set for the MultiWii pro and the MTK GPS module is a great way to protect your FC and finish off your install. The case retains full access to the 3 serial ports, inputs, outputs, reset and USB port. The GPS case comes with a 100mm tall pedestal mount and comes with mounting hardware.
Quality
Value
Overall
Quality
Value
Overall
As others have already mentioned, the case is great, but doesn't have holes cut out for all the possible pins. I wanted to use bluetooth, so I needed to do a bit of "plastic surgery" on the case. Also, the GPS puck is a good, clean install, but the MTK GPS board doesn't quite fit right. You have to run the wires very carefully and then push the two halves together fairly forcefully to join them; but in the end it does indeed work. I'm ordering my second one for my second unit.
Quality
Value
Overall
Quality
Value
Overall
??? ??? ?? ??? ?? ????? ???? ????.
Quality
Value
Overall
Quality
Value
Overall
The case for the multiwii fits good, just a few scratches on the case. The case of the GPS fits also well for the GPS-board, but you just need to dremel away a little part of the case to not crush the connector cables to the outside.
Quality
Value
Overall
Quality
Value
Overall
Nice case. I soldered my bluetooth module directly to the board and took the cable through the hole of serial port 1 which is unused. So I had not to cut a new hole in the case.
Quality
Value
Overall
Quality
Value
Overall
Well this is a nice little casing for the MultiWii Pro. However, it is a pity a little more thought went into the design and made provision for all ports to be used. As it is, just the basics are catered for - and you need to cut your own slots for additional ports that can be used for the likes of the OLED and Bluetooth connections etc. The GPS sensor housing is rather quaintly named 'HolyBro Hobby'. A religious brother housing! hahah! The MTK module fits, but the woring from it has to be bent very tightly to exit the casing. Other than that, it really is worth every penny.
Quality
Value
Overall
Quality
Value
Overall
Not all GPS modules will fit in the case, but this can just be fixed by using longer screws to tighten the GPS together.
Quality
Value
Overall
Quality
Value
Overall
Reasonable case, but as others have mentioned the gps doesn't fit properly. I think the gps case was designed for a different gps. Also the plastic standoffs moulded into the case don't line up exactly with the holes in the multiwii pro board. There are no holes that go all the way through so you can't bolt this case to your frame, unlike the bare board. The supplied screws don't have enough thread to fully bite into the plastic, so it is really easy to strip them. I ended up drilling out the frame so I could run some bolts through the FC mounting holes, which then holds the case together as well. Better than nothing, but this is not a high quality component.
Quality
Value
Overall
Quality
Value
Overall
Worth every penny and a must have
Quality
Value
Overall
Quality
Value
Overall
Useless! I tried to dry fit everything in and realised that i needed to do some cutting and shaving to get the board and GPS to fit. COULDN'T BE BOTHERED - so it's in the box until i find time to butcher it! I did read the reviews before i bought, so knew what to expect :-p
Quality
Value
Overall
View all reviews
Upload
Videos
  • Multi Wii Pro Case Set

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').