Corona 2.4Ghz DSSS Futaba module replacement system.
The Corona 2.4Ghz system replaces the standard Futaba module on most Futaba PPM systems equipped with an FM module.
Voltage : 4.8 V - 6V
Range : more than 1500m
Operating current : 30 MA
Sensitivity : 100dbm
Latency : 22ms
Futaba 2.4Ghz Module
*Please take note of the Rx and Tx versions. V1 and V2 are not compatible.
Hmotnost ( g )
I installed this module in my 2ch Acoms Technisport Hayabusa 27MHz.
my TX is negative shift PPM and it worked perfectly without signal inverter.
Ground range test more than 500 meters line of sight.
The pin out from left to right (looking to the back of the module)
Im using 3S lipo (Turnigy 2650mAh 3S 1C LLF Tx Pack (Futaba/JR) (USA Warehouse)) and didnt face any problem so far.
After binding, when ever you turn the TX and RX on you need to place them at least 60 to 100 CM away from each other to connect fast.
Installed this module in my Futaba FG 7 channel gold box. It worked great. Module is smaller then original FM module. I just hot glued the black foam from the packing in the box on two sides, trimmed to fit and holds module securely. Nice little upgrade if you have one of these old radios. They were built to last.good for 3pk, never worried again for lose sinyal100pcnt Recomended!!
I used this module to replace the FM module on my Futaba 3PJ car transmitter.
I know there's a 8 ch system, and will only work the 3 channels of the radio, and Corona offers 3 ch kits, BUT i have 12 models, among them some monster trucks that uses all the 3 channes (steering, throtle and reverse gearbox) And in some of my models, i have whattmeters, led lights, AMB sensors, ...
So it's cool having some spare channels to plug somehing.
It fits better than original futaba module on my old 3pJ and works just great.Porzadny i najprostszy w montazu zestaw. Szybkie bindowanie.Hi Guys, I used that V2 Modul in my Futaba FF-10 with more that 20 modells without any issues till the day I changed my TX Batterie to a 3S Lipo. After a search in the net I found only posts with positiv reactions. My Futaba FF-7 and FF-6 have no problems over two years till now with 3S Lipo TX Batteries. After apr. 3 h of using the 3S in the FF-10 I heard a "Bang" and awfull smell cam out of it. I opened the Corona Module I saw some black dust on some of the electronic elements. So I have learned my lesson well. No 3S Lipo wit a Corona 2,4GHz V2 Modul anymore. I ordered a new one and will use it only with the recommanded Batteries (8xNiMH)
exelente funciona muy bien con futaba 8UI got my Corona 2.4Ghz Futaba Module and 3 receivers today. 9 total days from order to door in upper midwest USA. Everything packaged well and nice and shiny Remove my spectra 72mhz adapter out of my Hitec Eclipse 7 and put the Corona unit in and had the 3 receivers bound and working in less than 5 minutes. I am installing one of the 6 channel receivers in a upper wing trainer and will try to get it out for a test flight this weekend weather permitting. So Far I see nothing wrong in my initial testing fast response to the servos but haven't range tested until i get to where we fly from.
me parece muy bueno tuve la version anterior y andubo bien recomiendoQue decir de este maravilloso producto, es fcil de instalar, facil de linkear, fcil de pagar.. todo lo tiene fcil.