Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • USA
  • Global

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g

QTY:

Now save Uložit 0,00 € 0,00 €

5,58 €
Stock:
Váha:
45 g
SKU:
CS238MG

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g

 

Specs:
Model: CS238MG
Operating Voltage: 4.8V / 6.0V
Operating Current: 300mA / 400mA
Operating Speed: 0.15sec.60º/ 0.14sec.60º
Stall Torque: 4kg.cm / 4.6kg.cm
Size: 29X13X30mm
Weight: 22g
Dead Band: ≤5uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 3 slider/Direct Drive
Ball bearing: MR106
Gear: Metal
Connector wire: 215mm
Operating Temperature Range: -20c ~ +60c
Spline count: 25

Product
Specifications

Další informace

  • SKU:
    CS238MG
  • Brand:
    Corona
  • Hmotnost ( g )
    45.00
  • Délka
    76.00
  • Width:
    32.00
  • Výška:
    51.00
  • Rychlost ( Sec / 60deg )
    0.14
  • Točivý moment ( kg) (min . 0,01 kg )
    22.00
  • Unit Weight (g):
    22
  • A ( mm ):
    35.00
  • B ( mm )
    30.00
  • C ( mm )
    31.00
  • D ( mm ):
    13.00
  • E ( mm ):
    41.00
  • F ( mm )
    19.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I have old serwo SC238MG with the red inscription Corona. It has well-fitting T-bar lift well. New with the orange inscription are loose. This is not the problem, some tape and it is well. New serwa work so as old, well. ( I always unscrew the casing and check the solder).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Smooth, not too noisy, centre OK. The horns, while not being a tight fit on the output shaft are OK once the screw is installed and tightened.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.
Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought some to replace the stock (plastic geared) rudder servo in the Dynam Pitts Python. It is a direct fit into the slot for the Pitts.
I am really happy with the quality of these Corona servo. Smooth and quiet. Really nice set of mounting accessories come included that allow you to mount vertically or horizontally.
I'll be getting more for any of the bigger jobs.
Cheers Michael
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gute stellgenaue servos und fr den Preis absolut zu empfehlen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought 8 of these servos. On all the horns fits very poorly on the splined shaft and even after screwing them on tightly, there is a big play. I fixed mine by using teflon tape. See the attached file how to do this and now the horns fits vey nicely. It is otherwise a great servo with very high torque for it small size. The gear train has a lot of gears. See the attached file so how can Corona equip them with such poor horns. Its a mystery. I give only 2 crowns because of this.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got 4 of these. I only need 2!! Not soak tested as yet, but I agree that the horns are not a fantastic fit on the gear. I will update once fully tested.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used it for a sweep wing mech on a f-14 shumate depron and it works great!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice mini servo and good torque and speed for the size. Build quality is fine for the price and so far its been great. Overall very nice servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
exelent for the price!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').