New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

DYS Smart3 3 Axis GoPro Gimbal with AlexMos Control Board (BaseCam)

DYS Smart3 3 Axis GoPro Gimbal with AlexMos Control Board (BaseCam)

Discontinued Product

Please continue searching for a similar product.
SKU:
206000007-0
WANT FREE SHIPPING? Click here to find out more!

DYS has been a world class manufacturer for years and one of the first authorized AlexMos manufacturers to adopt the BaseCam control system. Now they offer a GoPro class 3 Axis gimbal for the popular smaller range of MultiRotors.

There is no contest between the look of aerial video taken with a 3 axis verses a 2 axis gimbal.  The problem is 3 axis gimbals have been reserved for the larger cameras and more powerful MultiRotors. Now the Smart3 brings the power of AlexMos and BaseCam to the GoPro class of Multirotors. The benefits of the added 3 axis allows you to fly the camera not just the multirotor, with advanced features as Yaw lock and Yaw follow modes. All 3 axis’ can be controlled via the RC transmitter and various types of modes selected on the fly-live. 

If you are ready for PRO level results but do not want to invest in a huge multirotor and gear… look no further then the DYS smart3.

Features:
• AlexMos control board running BaseCam 3 axis
• DYS quality
• 3 Axis
• Various modes configurable with the BaseCam GUI
• Light weight
• Plug-and-play ready
• DJI Phantom Compatible

Specs:
Weight: 262g
Size: 80x90x90mm
Attachment: Hook/rod (50mm) or standoffs and DJI Phantom support
BaseCam Version: Authorized and full update support

  • SKU 206000007-0
  • Brand DYS
  • Kapacita ( mAh ) -
  • Hmotnost 410.0000
  • Délka 120.00
  • Packaging Width 120.00
  • Výška 120.00
  • 3 Axis Gimbal
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Just got this, worked pretty decent out of box no tune or anything. Sometimes it does not face the correct yaw direction, but if you push it into place it corrects it. I have not gone into the computer to tune or edit (may be something i can work out). Doesn't seem to need too much of a calibration out of box, but will be doing one soon to make sure. I would recommend as it seems to be a decent 3 axis gimbals on the cheaper side compared to other models. Time will tell though if it lasts (crossing my fingers), will update if anything major comes up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just got this, worked pretty decent out of box no tune or anything. Sometimes it does not face the correct yaw direction, but if you push it into place it corrects it. I have not gone into the computer to tune or edit (may be something i can work out). Doesn't seem to need too much of a calibration out of box, but will be doing one soon to make sure. I would recommend as it seems to be a decent 3 axis gimbals on the cheaper side compared to other models. Time will tell though if it lasts (crossing my fingers), will update if anything major comes up.

it looks to be a really good gimbal but BE AWARE input voltage betwen 9V and 12.4V !
( i wasn't noticed ibout that so now i have tou buy an UBEC ....)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

it looks to be a really good gimbal but BE AWARE input voltage betwen 9V and 12.4V !
( i wasn't noticed ibout that so now i have tou buy an UBEC ....)

A good gimball, out of the box settings were OK, did some tuning and it works great, especially for the price, i have seen a lot of more expensive gimbals not having the performance of thisone. The Alexmos board gives you so many options that you can make this gimball do almost anything

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A good gimball, out of the box settings were OK, did some tuning and it works great, especially for the price, i have seen a lot of more expensive gimbals not having the performance of thisone. The Alexmos board gives you so many options that you can make this gimball do almost anything

Nice gimbal for the price, carbon all round with a couple of exceptions like the gopro holder. Yaw axis works well unless connected to my computer, in which case it only works sometimes. Using it with a gopro 4 black and need about 5g of weight on the pitch motor to balance it out. The reason i dont give it 5 stars is the description labels dji phantom support, but it can only be mounted to a phantom by two standoffs. and then it hangs too low so you need bigger landing gear, preferably retracts. Might mount this on my Bumblebee frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice gimbal for the price, carbon all round with a couple of exceptions like the gopro holder. Yaw axis works well unless connected to my computer, in which case it only works sometimes. Using it with a gopro 4 black and need about 5g of weight on the pitch motor to balance it out. The reason i dont give it 5 stars is the description labels dji phantom support, but it can only be mounted to a phantom by two standoffs. and then it hangs too low so you need bigger landing gear, preferably retracts. Might mount this on my Bumblebee frame.

Not quite 'Plug and play' Took a few hours to install and finally set up the Gimbal.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not quite 'Plug and play' Took a few hours to install and finally set up the Gimbal.

The manual is not very informative. I would like to know the pin assignment on the controller. Also the orientation of the imu sensor.
Eventually I was able to figure it out thanks to RCG. Making it work, updating the software was than possible. Sometimes the third axis (rudder ) does not work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The manual is not very informative. I would like to know the pin assignment on the controller. Also the orientation of the imu sensor.
Eventually I was able to figure it out thanks to RCG. Making it work, updating the software was than possible. Sometimes the third axis (rudder ) does not work.

Do not waste your money! Mine worked fairly good a couple of flights; after that the gimbal started to jump and shake like crazy. I reinstall firmware, but never managed to make it work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Do not waste your money! Mine worked fairly good a couple of flights; after that the gimbal started to jump and shake like crazy. I reinstall firmware, but never managed to make it work.

Very nice Gimbal. Had lot of trouble setting up initially as I reset the default setting and nothing seems to work after and it was lying on the table for the first 3 months, almost giving up. Then, it happened. Had been using for around 9 months now. Very happy with it. Just have to check the scrub screw that holds one of the motor as this sometimes become loose causing jello.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice Gimbal. Had lot of trouble setting up initially as I reset the default setting and nothing seems to work after and it was lying on the table for the first 3 months, almost giving up. Then, it happened. Had been using for around 9 months now. Very happy with it. Just have to check the scrub screw that holds one of the motor as this sometimes become loose causing jello.

I bought this gimbal thinking it would provide smooth video. It does to a certain extent, a lot of tinkering with Pids and firmware. I find firmware v2.3 seems to work best, with a gopro 4. I would have rather saved my cash and bought the Feiyu tech, which is a lot more expensive.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this gimbal thinking it would provide smooth video. It does to a certain extent, a lot of tinkering with Pids and firmware. I find firmware v2.3 seems to work best, with a gopro 4. I would have rather saved my cash and bought the Feiyu tech, which is a lot more expensive.

it's pretty much a plug and play gimbal as written in the description. Mine worked well out of the box but to get it running perfectly, you have to put in a lot of time and effort.
I'm looking forward to the next testflights.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

it's pretty much a plug and play gimbal as written in the description. Mine worked well out of the box but to get it running perfectly, you have to put in a lot of time and effort.
I'm looking forward to the next testflights.

  1. 1
  2. 2
  3. 3
Customer files
No File Name Download [146]
No File Name Download [146]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save