The Easy 3D is a great sized club aerobatic model of the traditional style that is designed to be great fun as well as cheap and easy to build.
The Easy 3D is lightweight but designed to handle a little abuse! For instance, the alloy under-carriage is uniquely rubber mounted, the steerable tail wheel uses a substantial rudder & fuselage mount, all three wheels use proper rubber tyres, the control horns are the heavy duty type and the cowl is of a tough GF construction. Also included with the Easy 3D is mounts for both glow and EP, fuel tank, engine mount and spinner, making it great value for money!
This great performing "club" aerobatic model is also cheap to build, standard servo's will be more than up to the job for all but the most hardcore 3D pilots and there is no doubting the capability of this nicely priced model, it's brilliant low speed performance combined with it's easy to fly nature make the Easy 3D a great first 3D model or on low rates, a great fun aerobatic model!
• Lightweight Balsa/Ply Construction
• Brightly coloured & Traditional See Through Covering, Great for Orientation
• Fast and Easy Build
• Rubber Mounted U/C
• Comprehensive Hardware Included
• Great First 3D Plane
• Mounts for Either Glow or EP
• Hard-wearing Rubber Tires All Round
• Plug In Wings for Easy Transportation
• Large, Quick Release Canopy
Wing Area: 45dm2
Your own 6 Channel TX/RX
0.46 Glow Engine/42mm Brushless Outrunner Motor around 800w (3D)
5 x Standard Servo (4 x for EP version)
60A ESC (EP Version)
RX Battery (Lipo or Nimh)
UBEC (for EP or Lipo RX Battery)
4s Lipo 2700mAh~3300mAh (EP Version)
Kapacita ( mAh )
Hmotnost ( g )
This is a very will made plane putting this together took no time at all. I have put a OS40 glow using a 11x4 prop plenty of thrust good for prop hanging and 15pcnt nitro. Total weight of around 1.8 kg. If they restock may buy a second.the medium is set, the engine cowling is low in fiber quality and used without paint peels. About the price, shipping to Brazil is expensive which makes the product benefit with average cost. The Construction Builder wood / balsa looks good.This is a very good value 3D plane. It is personally my first plane, and it was fairly straight forward to build. Very light weight, loads of power with a .46 nitro and a 10x7 prop. Elevator snapped on me under steep descent, but that was probably my fault for over-speed, managed to land with minimal damage which was very impressive as half went completely and the half with the control horn was barely in place. (Landed hard taking wheel mounts off and breaking engine mount, easily replaced/repaired. Need to build myself an elevator).
Everything inside the box is of good quality, very impressed with it for my first plane. Is touchy and took some getting used to first flight, so perhaps not best choice for first plane, but I managed so if you are keen to skip the trainer stage, not a bad choice.
Very good value as it was cheaper for my to ship from HongKong to Australia, than purchase anything locally.
NOTE: This plane does not come with engine mounts as stated in the description!!!