Tired of all those electric cars infesting your local R/C track?
This high-rpm, huge power glow engine will give your car all the power it needs while drowning out the sound of those pesky electrics! No need to worry about expensive batteries here. Just re-fuel and you're off!
Tear up the track all day with our 21 size 2-stroke glow engine!
• ABC construction, Aluminum piston with Brass liner that's Chrome plated
• Dual ball bearing-supported crankshaft
• 14mm SG Crankshaft
• Large anodized head with cooling fins
• Pull starter pre-installed
Crankshaft: 14mm SG
Maximum Power: 2.6hp
Hmotnost ( g )
I bought this as an upgrade to my Turnigy Trooper Nitro SCT 4X4. The stock has a 0.18 size engine so I decided to go bigger.The exhaust manifold is 18mm round diameter and the crankshaft has a 12mm smooth shaft after the thread. This information is handy to know as I literally cut it off so shat I could fit the motor upgrade package. The flywheel locking nut would not fit unless you cut off that excess smooth shaft.
The motor mounting screws are 20mm apart on both side and the air filter connection is 15mm diameter. Very happy with the purchase irrespective of the slight modification to fit the flywheelJR/Hitec 11.8kg / 0.07 / 58g
5 STARS ????? 4 STARS ???? 3 STARS ??? 2 STARS ?? 1 STARS ?
Impresionante motor! es compatible con motores GOHi I recieved mine on the 14th of december and have only finished break in today at the local track. One thing to do is to open your engine and check for metal shavings and use an old glow plug. after break in today I ran my engine and gave it a race tune this engine is excellent it has massive low end torque but i could have asked for more high end but a tuned pipe would have helped. after today I checked compression it is still so tight cant turn it over by hand. if your thinking of this engine go for it.