HobbyKing is excited to be carrying the full range of the ESUN brand of 3D printing filament. ESUN is recognised as one of the world's leading and most innovative manufacturers for 3D additive printing.
The PLA, ABS, Flexible, Luminous and many other types of materials are perfect for whatever application you have in mind. ESUN has established their brand recognition through their quality products and consistency, the filaments have a stable melting point, good round shape and most importantly a 0.05mm uniform diameter tolerance for a consistent flow rate.
ABS is a fantastic plastic for mechanical real world use prints where a durable item is required. It has some give under stress making it perfect for multirotor frames and gears. ABS also has a higher melting point making it more suitable for some applications.
For printing with ABS it is recommended to have a heated print bed or Kapton Tape for proper bed adhesion. ABS can also have a slight odor when printing so a well ventilated room is recommended, please note that it has no odor when the print is finished.
ABS is slightly harder to get dialed in unlike PLA, but once set up the printing is consistent and the prints are truly real world useable. Other popular uses for this material are R/C spare parts, building blocks and toys for the kids.
3D printing is a fun and exciting hobby with a wide range of uses from prototyping parts to making toys for the kids. Picking the right filament for your application is very important. Please visit the ESUN web site for more information as well as the recommended settings for your printer.
• Stable melting point
• Good round shape
• Uniform diameter tolerance 0.05mm
• Consistent colors
Filament Material: ABS
Filament Diameter: 1.75mm
Hmotnost ( g )
It is very good filament, but it hard to work with it.
My print settings with this are:
Nozzle - for the first layer: 260°C, for the rest layers: 250°C
Bed - 100°C (110°C will be better). It sticks well to the dry PVA glue. And you need to turn your fan off to avoid curving.This brand of plastic not very good quality, have tried multiple time to print something, and all the time print fails after 1 or 1,5 hours of printing. I did try different temperatures settings from 230 to 260 never success,
Layers are splitting, poor adhesion between layers, can brake print with bare hand along the layers.
Definitely never buy again.
I printed a lot with different brand of ABS and I never had a single issue with them.
This is very good ABS to print with. The rolls arrived today and I started printing straight away. Print settings are 235C for the nozzle and 85C for the plate. Very nice result, practically the same as printed in PLA. Veruy happy, will buy more.