Crafted from Laser cut ply & balsa then finished with quality covering film and a fiber glass cowl this little park flyer sized Extra 330L kit will make a fine addition to your hanger. Featuring a sturdy one piece aluminum landing gear and CF wing tube the Extra 330L is a quality model that will stand out from the crowd. You will require 4 x 9g servos for the control surfaces, a 28 size brushless out runner, 35a ESC, 1800mah 3S1P lipo and a suitable prop and spinner to complete the kit.
This model also features a large removable canopy to allow easy access to the battery compartment and electronics. The canopy design and construction follows the same molding principles and quality finish as many larger models. All mounting hardware is included along with a steerable tail wheel set.
Wingspan : 980mm
Length : 880mm
Wing Area : 19sq.dm
Flying weight: 520g
Motor: 28-36 to 35-36 Size ~1100kv (Required)
Battery: 11.1v 3S1P 1800mah 25c (Required)
Batter Compartment: 110L x 45W x 42H mm (MAX)
Servo: 4 x 9g (Required)
28 to 35 Size ~1100kv
11.1v 3S1P 1800mah 25c
4 x 9g Servos
Your own Tx/Rx
Hmotnost ( g )
hi, recently my plane crashed and lost the canopy and cowling and no where can get these parts, I have written to the manufacturer requesting www.hobbyking.com and these parts and have had no response. Can anyone help me??Hi!
Now for an update!
The weight of the plane ended at 980g so flying weight of 520 isnt possible!
With just the plane and without electroniks it weight about 490g so a setup on 30g wont get the plane far^^
Bot now for the flight! It is NOT a beginners plane. Its really quick in the manuvers. It does 1,5 rolls in a sec!
BUT! I will only give it 2 stars becuse its not stady in the air! If you pull the elevator to much it loses control and "falls" over the wing.....
And by "to much" I dont mean so much! Its a DISAPOITMENT....
BUT if I can fix it I will update!:)I dont understand what everybody is complaining about! Its just a little bit pink!
Just receved mine today! Cant wait till I can do the maiden!
My setup will be:
Turnigy 35-30B 1400kv -motor
Turnigy 40A Plush -speed controller
Trunigy 11.1V 2200mah -battery
The stars is only for the looks and for the airframe! And how stable everything is! I will wright a new review when I have done the maiden! Feels like a very good airplane!
Sorry for my bad english.
And also! I think I will upload the maiden flight video)
With Best Reguards