Extra Strong Control Horns w/ Bearing 34mm (5pcs)
diam2.8mm x 34mm
Hmotnost ( g )
Great hardware. High quality and very nice look. You may want to cut away a piece of the plastic bulge on one side of the clevis to fit the ball bearing perfectly.These are of high quality. I found no slop in them, the bearings realy make these run smootly. The threads are metric, M3 to be exsact. Exscelent for large scale models.Price / quality ratio is very good I recommend Daniel!!!Good stuff for less money!I replaced the hardware on the UCD .60 with these and used the heavy duty servo arms from HK on the HiTec 5495 Servos. Also beefed up the pushrods with HK carbon fiber tubes glued over the rod and held in place by nylock nuts. Needless to say, no play, no flutter and solid centering. Makes for very solid 3D performance at a very very affortdable price. Way to go HK. As always the price and quality is there.Decent hardware at a decent price. The mounting scew is very long and will require trimming on most applications. This is a good thing, allowing it to be used on even the thickest of rudders, ailerons or elevators. I used a generous amount of blue locktite on both screws. They are a little less than half the price of Du Bros units, except they com with grade 8 screws that bolt thru the cone, instead of into the cone on the HK units. Would have to be used with longer heavy duty servo arms.What is the small black plastic washer like thing for?
Where does it go?
What is its function?
============excellent horns I am using these on a 6.5 kg plane with an OS 200 and they have performed without faultExcelente para giants, contudo deve-se tomar o cuidado quando for fixa-lo superfcie mvel, pois somente tem um parafuso de fixao e deve-se ultilizar trava rosca de mdio torque.FIz uma pequena alterao mas funciona bem e aguenta bem as foras de um servo potente