The F330 is a well thought out 330mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra durable polyamide nylon.
Assembly is a breeze with pre-threaded brass sleeves for all of the frame bolts, so no lock-nuts are required. It utilizes one size of bolt for the entire build, making the hardware very easy to keep in order and only requiring one size of hex wrench to assemble.
A great feature of this frame is the large mounting tabs at the front and rear of the main frame bottom plate for mounting cameras or other accessories. This makes for a great way to take aerial video or fly FPV without the need to add any additional mounting brackets.
The F330 also features colored arms (2 white and 2 red) which are great for orientation. It helps to keep you flying the right direction without the need for different colored props.
We offer a full line of multi-rotor electronics such as multi-rotor control board, ESC & motors. It has never been easier or more affordable to get a quad in the air!
• Built from quality glass fiber and polyamide nylon
• Pre-threaded brass sleeves for all of the frame bolts
• Colored arms for orientation to keep you flying in the right direction
• Large mounting tabs on main frame bottom plate for easy camera mounting
• Easy assembly
Weight: 147g (w/out electronics)
Motor Mount Bolt Holes: 16/19mm
4 x 28mm 1000~1200kv (or similar size/kv)
4 x 12~20 Amp ESC
4 x 7x5~8x4 Prop (2CW & 2CCW)
1 x HobbyKing Multi-Rotor Control Board
1 x 1000~1800mAh 3s 11.1v Lipoly battery
Kapacita ( mAh )
Hmotnost ( g )
Good frame for the price. There's a bit of a slight twist in the arms but hasn't effected performancenice frame lightweight fit my multistar 2212-920 motor 9" propsThis little gem is a fantastic Quad frame kit! I have no issue with this little beasty and with Turnigy Aerodrive SK3 2822-1275 and some 8x4.5 props this thing is very quiet running. Im using the 12A afro esc and a kk2.15 mini board with very low gain settings and im getting 20 minutes with a 2200mah 40c! I covered mine in black carbon fiber vinyl on the bottom plate and red carbon-fiber vinyl on the top plate. Looks great with red Props and really has tons of power and is very Fun to fly.......I was racing against some rc truck's today and it was fun to win in sheer speed and even better to blast up to the moon after i would win each time and boy did the rc truck guys have problems keeping there eyes on there machines i mean how cool is a little zippy quad????nice frame, a bit heavy. perfect for first quadThis is a affordable lightweight frame great for beginners wishing to build a quadcopter. The top and bottom mounting plates are of adequate thickness and also flex a slight bit. However, the weakness of this frame is in the arms. The plastic is made of extremely poor quality. You can clearly see the molding and chiseling lines on the arms. The arms are easily snapped at the motor mounting section where it is thinner than the other parts. You can't buy replacement arms for this so either buy 2 kits or not at all, because you are bound to snap an arm.Good quality parts on this if a little heavy but with the setup i'm running i don't have a problem in that way. setup is KK2.1.5 3s 2200, D2822/17 1100kv, 8x4.5 props, HobbyWing X-Rotor 20A OPTO ESC. its off the ground before 50pcnt throttle. would be nice if it had a 3rd deck on top though.Nice little quad frame - kind of brittle, though!Very pleased with this little frame as this was my frist quadcopter build. Not only pleased with the product, but the wealth of information on this site through videos Hobbyking has done, and the discussions. I have just ordered the F450 frame and the electronics to start my 2nd build now that I've got my first under my belt.The frame is pretty solid and the arms have little flex for me. Running 1400kv 28mm motors, 25A ESCs, 3-4 cell lipo, and a Multiwii flight controller. This thing is very fast and pretty tough. I've had a few crashes and yet to have an issue. The top plate will need to be drilled for a 30.5mm board or you can buy an adapter board and drill it. If you do this you can put a large battery in the bottom tray and fly for a while. This guy does sit low to the ground as well, do not plan to put the battery underneath without modification. Great buy, definitely would again.was a little surprised that its so brittle one crash snapped a leg it is cold here was very disappointed if you buy one get two for spare legs
F330 with 450 heli landig skids download now [1940kb] F330 KK2.0 download now [1960kb] F330 DeadSquirrel FPV download now [1710kb] F3330 DeadSquirrel bottom download now [628kb] F330 DeadSquirrel FPV side download now [1222kb] Miniquad Photo download now [592kb] F330 frame for anti-vibration download now [1147kb] 330 built download now [1450kb] f330 w/naze32 download now [542kb] f330 w/naze32 download now [493kb] f330 w/naze32 download now [493kb] f330 w/naze32 download now [570kb] f330 w/naze32 download now [576kb] f330 w/naze32 download now [594kb] f330 w/naze32 download now [602kb] f330 w/naze32 download now [517kb] f330 w/naze32 download now [632kb]