The flight mode switcher has been designed for open source autopilots such as APM, PX4 and Pix etc. It can switch the flight mode accurately and quickly and replaces the troublesome 2 stage and 3 stage switchers.
Users can set the parameters for the flight mode switcher on the unit and choose the most suitable modes for their requirements. The flight mode switcher features a stable performance, is easy to set up and is small and lightweight.
Typical flight modes are as follows:
• STA (Stabilized) Model will automatically level itself
• SIM (Simple) Allows you to control the movement of the model from the pilots point of view regardless of which way the model is facing
• ALT (Altitude Hold) When this mode is selected it will hold this altitude
• LOI (Loiter) Allows model to hover in the same spot on its own without any input from the pilot
• AUT (Auto) The model will follow a pre-programmed course stored in the autopilot
• RTL (Return to land) Once selected the model will return and land at the point of take-off
The flight mode switcher is simple to install on your transmitter but it is not "plug & play", there is a small amount of soldering involved inside the Tx. See under the "Files" tab for installation instructions.
Once installed on your transmitter and set up in "Mission Planner" it is very simple to use, just press the relevant mode button on the switcher and the model will go into that mode. There is an indicator light to show which mode has been selected and is in use.
• Allows the user to easily set 6 flight modes
• Simple and straightforward to install
• Compact and lightweight
• Status indicator lights
Type: Flight Mode Switcher
Working Voltage: 3~5V
Modes: 6 selectable
Operating Temperature: -10°C~+60°C
Dimensions: 59 x 29 x 9.3mm
Flight Mode Switcher
Hmotnost ( g )
Excellent switch, build quality, functionalityI hooked this up to my TGY-I6 for switching the various flight modes of an APM 2.6.
It was easy to desolder the potentiometer of VrA and solder the cable in place. I only had to change the PWM value of the ALT-Hold switch and it was so simple that it looked almost unreal. Absolutely a must have, if you have a compatible radio (it only need to have a potentiometer aux channel) and an APM/Pixhawk Flight controller.ottimo! lo consiglio io l'ho montato sul mi frsky taranis x9dNice and cheap switch.
Makes switching modes easier and the leds help to know the exactly mode you are flying with. The manual is clear but more information regarding possible TS would help buyers to decide. Regardsvery good item ,easy to install, a littlle bit of soldering ability, very clear instruction on file tab , i install it on a JR radio transmitter with a switch for select knob or flight mode switcherI've used this switch for about a dozen flights over a week. My relevant setup is a Pixhawk clone with the HK-T6A radio/receiver combo. This switch box gets soldered in place of a knob, and took less than 10 minutes to install and program. Adjusting the PWM output values is very simple, the manual is in the "Files" tab. Not having to deal with a potentiometer or rotary switch to change flight modes is a plus, as well as having a visual indicator of what mode you're in. If you've got a multi-mode flight controller, you'll want this simple little box. I took off a quality star because one of the switches doesn't have the same feel as the others, the click is less firm and quieter.