Flybar Locking Tool for Trex 500 (neon orange)
Flybar Locking Tool for Trex 500 (neon orange)
Copy and Share the Below URL
The purpose of the locking tool is to make sure the flybar stays in one place whilst you check both blades, therefore all the leveling is not necessary. With this tool, setting up pitch is very easy and there is no need for the bubble leveler.
-
SKU HKF-FTX-502
-
Brand -
-
Kapacita ( mAh ) -
-
Hmotnost 20.0000
-
Délka 100.00
-
Width 4.00
-
Výška 50.00
Agora nao preciso ficar mexendo no flybar
Agora nao preciso ficar mexendo no flybar
The locking tool required some modding to have it fit right as the legs where a little too long. There is two ways to fix and have it working 1) Add a heap of washers under the Button head or 2) use a Dremel and carefully remove some acrylic from the legs bottom. Only about 4-5mm was required. I chose the latter. Once this was done the tool is fixed down with the Heads button and all is perfect.
The locking tool required some modding to have it fit right as the legs where a little too long. There is two ways to fix and have it working 1) Add a heap of washers under the Button head or 2) use a Dremel and carefully remove some acrylic from the legs bottom. Only about 4-5mm was required. I chose the latter. Once this was done the tool is fixed down with the Heads button and all is perfect.
Received in good condition. Good quality.
Received in good condition. Good quality.
nice and helpfull tool to setup the Heli. I then them in different sizes. Recommended.
nice and helpfull tool to setup the Heli. I then them in different sizes. Recommended.
Others Also Bought
-
Glass Fiber Cloth 500x1000mm (Medium weight)SKU: GF-Cloth-1M
1,51 € -
PROPDRIVE v2 2826 1350KV Brushless Outrunn...SKU: 9192000326-0
14,89 € -
Turnigy D2826-6 2200kv Outrunner MotorSKU: D2826-62200
10,03 € -
Sports Electric 3-Blade Propeller 6x4 (CCW...SKU: 074000120
0,95 € -
Sports Electric 3-Blade Propeller 6x4 (CW)...SKU: 074000121
1,14 €
Související produkty
-
HK-500GT Landing Skid (Align part # H50122)SKU: GT500-139
1,94 € -
HK-500GT Carbon Tail Support Rod (Align pa...SKU: GT500-243
3,21 € -
HK-500GT Landing Skid Pipe (Align part # H...SKU: GT500-140
1,94 € -
HK-500/Trex 500 Flybarless DFC SwashplateSKU: 155000130
8,24 €