The KINGKONG Force 200 Multirotor Driving Equipment Set comes with absolutely everything you need to get a 250-270 sized multirotor frame in the air. The kit is packed full of features with flight controller, ESC’s, UBEC, motors and other accessories plus 5040 propellers.
Not only is this the perfect multirotor power package it is excellent value for money.
• KINGKONG 2204-2300KV Motors (CW and CCW)
• KINGKONG 12A 2-4S OPTO BLHeli ESC’s
• KINGKONG 5V-3A UBEC
• Mini CC3D Flight Controller
• 5040 Propellers (CW and CCW)
Voltage: 7.4-14.8V (2-4S LiPoly)
Max Thrust: 440g
Number of Poles: 12N/14P
Prop shaft: 5mm
Motor Shaft: 3mm
Bolt hole spacing: 16mm or 19mm M3
Input Voltage: 7.4-14.8V (2-4S LiPoly)
Constant: 12 Amps
Burst: 20 Amps (5sec max.)
BEC: No BEC, OPTO only
Weight: 7.5g (with wires)
Input Voltage: 6V~28V/DC (2-4S LiPoly)
Output Voltage: 5V
Ripple: Constant: 3 Amps
1 x Micro CC3D
4 x 2204-2300KV motor (2CW + 2CCW)
4 x 12A ESC (2-4S opto)
1 x 2-6S 5V3A UBEC
1 x Power Distribution Board
20 x 5040 Pros (10CW + 10CCW)
1 x Anti-vibration plate
1 x ESC PC software communication adapter
16 x M3 x 6mm round head screws
16 x M3 x 7mm round head screws
1 x pack of ESC power cables
1 x ESC Instructions
1 x USB Cable
Multirotor Frame Kit
5-6 Channel RX/TX
Optional FPV equipment
Hmotnost ( g )
Günstiges Gesamtpaket. Habs zweimal gekauft.
Alles passt ganz gut zusammen. Und ich hatte keine Probleme meinen 250 Quad mit 3S Lipo in die Luft zu bringen.Really awesome kit!!
I assembled parts on a 250 racing frame and made electrical connections to CC3D without any trouble. I only looked for CC3D pin assignment on the Web to avoid mistakes on wiring of ESCs and UBEC. After the setup with librepilot, everything works perfectly. Very good performances with 5040 props included, perfect and very fast with 6040 props and 3S battery.
Built my first quad using this kit. As a beginner it was perfect. Had everything required apart from the frame, FPV gear and RX/TX. Didn't trust micro CC3D flight controller when I first seen it, I thought the build quality was poor. But after tuning the build I actually quite like it. Put it all together on the Quanum Falcon Billet block frame Flies like a dream. Bought a spare motor just in case, and flown on 3s and 4s. Scary quick on 4s... As the price? It was on sale for me, a bargain.It is not top quality and top performance solution, but for this price it is more than satisfying. Everything is working fine. My 250 quad is flying very well with this set. I liked anti-vibration mounting very much. Included micro CC3D can be flashed to Betaflight or cleanflight.Tut was es soll
Raketen werden damit sicher,keine gebaut, aber für Anfänger oder zum testen von Racern,
Ist das Packet 1AGood value Set that got my quad off the ground after a bad crash. Would buy againNice little kit. Relatively cheap. The ESCs can be easily reflashed with the provided programming plug. And with the newest BLHeli firmware these will do OneShot125 and Damped Light just fine. The flight controller took some experimentation though, as this particular model is close to the CC3D Atom board but not exactly the same.PERFECT, WORKS GREAT AND HAVE NO PROBLEMS... I AM ORDERING 2 MORE JUST TO HAVEThe set is wow. Perfect. In this price! So cool. Good to try it. I can recommended the setComplete fail. No words to describe my disappoinment. When I turned up the first time 2 ESC smoked and burned up!! The other two ESC don't work. HobbyKing cheated me for the second and last time.