When it comes to possibilities the Frsky TARANIS sets a new standard. FrSky is well known for their frequency hopping ACCST technology, that takes advantage of the entire 2.4GHz band, resulting in excellent range and reliability, they now offer their first full transmitter system.
The TARANIS mixes the power of the “OPEN TX” open-source software with an unbelievable ergonomic case with 8 programmable switches, two twist knobs and two easy to get to lateral 'slider' pots, and not to mention the ultra-smooth quad bearing gimbals.
The TARANIS utilizes Voice Alerts from an internal speaker, versus just an annoying beeper. For things like; audible Count down timers, low voltage warnings, landing gear down warnings etc., just about anything can be programed, you can even use your own voice. The SD card slot offers unlimited memory options and a USB port for upgrades even a headphone jack.
One of the best features of the TARANIS is its full telemetry capability, as well as RSSI signal strength feedback, there are 3 different programmable failsafe modes and receiver lock, so no more crashes due to selecting the wrong model. If you have stock in other brand receivers or B&F’s, no worries the TARANIS has a JR style RF module slot, so you have the option of other brand modules such as the Orange DSM2/DSMX or Open LRS 433mhz module, or pop in another Frsky module to expand the transmitters capabilities even more with duel RF.
When you put it all together, between FrSky ACCST technology and the power of “OPEN TX” software and community, a ergonomic case with ultra-smooth smooth ball bearing gimbals and a large backlit LCD with a included aluminum case and battery pack. You have versatility and power at an unprecedented value.
• RSSI alarms (warns you of reception problems before it becomes an accident)
• 16 channels (more when combined with external module)
• 64 mixers, 9 flight modes
• 16 custom curves with 3-17 points each, 32 logic switches
• Self-test of the transmitter antenna
• 60 Model memory (expandable via a SD card)
• Audio Speech outputs
• USB and SD card slot for unlimited memory, and firmware upgrades, sound editing.
• Long range system capable of up to 3 times the range of current systems
• Quad bearing gimbals that are silky smooth
• State-of-the-art open source software (open TX)
• Super low latency for ultra-quick response (9ms)
• Large backlit display
• Real-time data logging
• Receiver lock (program locked to aircraft)
• JR Style module bay for additional RF modules
• Processor: STM32 ARM Cortex M3 60MHz
• Aluminum Travel Case
Model name: Taranis X9D
Number of Channels: up to 16
Operating Voltage Range:6-15v (2s, 3s Lipos are acceptable)
Operating Current: 260mA maximum (both RF module and backlit are on)
Operating Temperature: -10~60C
Backlit LCD Screen: 212*64 Monochrome
Model Memories: 60 (expandable by SD card)
Compatibility: FrSky X series, D series and V8-II series receivers
stick mode: Mode 1 (Right hand throttle)
Taranis X9D ACCST 2.4GHz Transmitter (Mode 1 version)
Aluminum Travel Case
*Note* Wall charger not included. See related items below for options
Hmotnost ( g )
Theres not much more I can add to the huge amount of information and rave reviews about this product apart from confirm for you that they are correct.
This is just as good as they say, better features than i expected, high quality hardware and construction and delivered safely without any dings or marks.
This is now my main go-to TX for everything, my tricked 9x now takes the 'backup only' role.
Seriously, this product deserves 10 stars out of 5, especially at this price :-)Arrived in 7 days from HK to Aus, not bad, pity the packaging was minimal and it arrived with the case damaged and missing keys. Other than that its fantastic and only took me 5 minutes to configure it for use with a FPV250 with Naze32. Cant wait to configure it for all my other aircraft !!nice TX ever in the world... no word can derive it...superb best value for money..a very good stuff from ur HK store!!!After some waiting time mine has also arrived, and yes, waiting has worth it.
I belive that, right now, you wont get other Radio for such value for your money, I just can say, incredible.
I ordered Mode 1 version, because that was the only one available at the moment. Dont be afraid if you have to convert it from one mode into the other, its very very easy to be done.
Despite all you know regarding programming Radios you have had learned before, but once used to it, you will find out how easy it really is.
Once ordered, I have preprogammed the Taranis meanwhile the real one was on its way to me, and once arrived I just have made some small adjustments and went flying, awsome!
In any case of doubts I had, just checked the Internet, and I found a lot of helping threads and also very nice tutorials on Youtube.
Regarding build quality I just can compare to my club mates radios, they use Graupner, MPX, Hitec, and there is nothing to complain about.
And of course, I would highly recommend the Taranis.Nice Manipulators Manipulators Tara draws the very power plug
Hoe good chapterThe speaker suxx...the sliders suxx, but the rest works gr8. Would i buy again...yes.
Wont say that it worth changing from the er9x to this unless you GOT TO HAVE that voice thing and rssi with a voice calling out the strength numbers...recomend waiting until they learn to tighten some screws and make it perfect...Very good transmitter. I will be buying one more.I just received my transmitter the other day turned it on and noticed the rudder trim didn't work. I had to open the case to change transmitter to mode 2 anyway so I took the trim board out and noticed it had a bad solder joint on the trim plug. solder was missing on the center lug. I soldered it up and now everything seems to be working fine. I'm just glad I saved time money and aggravation by not sending it back for repair or replacement.Some suggest this is a hard radio to master. I disagree. You just have to (1) forget any programmable radio you have had before.
To put it simply, unlike other radios where you select programming (like elevons), nothing is presumed. You have up to 32 channels. You decide what behavior you want on a channel, and based what input(s), and throw that into the mix for that channel. So, if you want channel 18 to be controlled by the right slider, at 100pcnt, then the mix is RS 100pcnt. And you can combine mixes on any channel (I have 5 or 6 on some of mine that are conditional). The radio enables you to tell every servo or ESC exactly what you want it to do and how - it does not stand between you and the servos with reprogrammed mixes that may or may not work for your application.
Yes, there are curves, flight modes, custom software switches, custom functions, sounds, telemetry, and more (and still more on the way) - but you only have to use the bits you need - you do not have to learn it all at once. And, oft-times, there are multiple ways to accomplish your goal.
Best part is, the Companion software for OpenTX (which is free) lets you play with the programming on your computer before you buy the radio, and any mixes you come up with can be transferred into the radio directly. Scott Page has also done some wonderful instructional videos.
Bang for the buck, this is the cuTaranis is amazing, so many functions so many features.Its gonna take some time , although its laid out logically which helps.Wish I had a explanation of what the menu functions do. Would I be correct in assuming that if used on for example a giant scale plane where you had to use a "match box" to sync servos on the control surface , with the taranis 16ch system you dont need a matchbox because you can set each servo's travell limit,midpoint, on the tx individually?
Taranis Manusal czech pdf download now [4534kb] No File Name download now [2618kb] Taranis Manual pdf download now [786kb] No File Name download now [3964kb] No File Name download now [8282kb] No File Name download now [8282kb] TARANIS X9D Portugues Brasil download now [850kb] Teclas de EdiÃ§Ã£o em portugues Brasil download now [15kb] Get started Taranis resource guide download now [27kb]