New Items Novinky Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

FrSky D8R-XP 2.4Ghz Receiver (w/telemetry & CPPM)

FrSky D8R-XP 2.4Ghz Receiver (w/telemetry & CPPM)

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

25,30 €
Stav:
Skladem
SKU:
D8R-XP
WANT FREE SHIPPING? Click here to find out more!

FrSky D8R-XP 2.4Ghz Receiver (w/telemetry)

Compatibility:

 
Compatible with FrSky two way telemetry modules: DFT, DJT, DHT, DHT-U

CPPM out
 

Specification:

 
Dimension: 55*25*14mm
Weight: 12.4g
Operating Voltage Range: 3.5V-10.0V
Operating Current: 100mA
Operating Range: 1.5km
Resolution: 3072 (>11bit)

 

  • SKU D8R-XP
  • Brand FrSky
  • Kapacita ( mAh ) -
  • Hmotnost 43.0000
  • Délka 163.00
  • Packaging Width 20.00
  • Výška 88.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great price cant wait to install it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great price cant wait to install it

Really good receiver!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really good receiver!

I like this receiver; it works well. The only downside is that you cannot use 8 channels PPM without upgrading the firmware. And the upgrade requires an FrUSB-3 cable, plus a cable to match the FrUSB-3 to the receiver. Upgrading the firmware will give 27ms pulse width which will allow 8 channels.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I like this receiver; it works well. The only downside is that you cannot use 8 channels PPM without upgrading the firmware. And the upgrade requires an FrUSB-3 cable, plus a cable to match the FrUSB-3 to the receiver. Upgrading the firmware will give 27ms pulse width which will allow 8 channels.

Great receiver. ... tested 1.6 miles fly .. never a glitch...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great receiver. ... tested 1.6 miles fly .. never a glitch...

work well with frsky Djt telemetry module and 9rx radio

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

work well with frsky Djt telemetry module and 9rx radio

Overall a good receiver. The RSSi and PPM options are excellent and work great. Simple binding process with a Taranis on D8 mode. Telemetry catches up instantly, however it doesn't work properly. The analog inputs on the Rx fluctuate quite a bit (some times up to a full volt!) and when I used a voltage divider to measure the voltage on my lipo's the reading where not consistent even after calibrating to my multimeters. I will try digital telemetry later and post my results. Still a nice receiver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall a good receiver. The RSSi and PPM options are excellent and work great. Simple binding process with a Taranis on D8 mode. Telemetry catches up instantly, however it doesn't work properly. The analog inputs on the Rx fluctuate quite a bit (some times up to a full volt!) and when I used a voltage divider to measure the voltage on my lipo's the reading where not consistent even after calibrating to my multimeters. I will try digital telemetry later and post my results. Still a nice receiver.

Blown away by these receivers, the peace of mind that comes with RSSI telemetry warnings (on both our Taranis and 9XR) alone is worth the cost of entry over other FrSky receivers such as the V8R7. For very little weight cost, I can monitor main battery voltage with the FBVS01 on simple fixed wing, and with just one cable can pull full telemetry data over the digital port in conjunction with my Naze32 FC's. There's a type of data redundancy in that my telemetry data, sent to my transmitter and set to audibly alert me in case of exceeded parameters, will alert me to a situation I didn't notice on my OSD, and otherwise wouldn't have, until after the crash :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Blown away by these receivers, the peace of mind that comes with RSSI telemetry warnings (on both our Taranis and 9XR) alone is worth the cost of entry over other FrSky receivers such as the V8R7. For very little weight cost, I can monitor main battery voltage with the FBVS01 on simple fixed wing, and with just one cable can pull full telemetry data over the digital port in conjunction with my Naze32 FC's. There's a type of data redundancy in that my telemetry data, sent to my transmitter and set to audibly alert me in case of exceeded parameters, will alert me to a situation I didn't notice on my OSD, and otherwise wouldn't have, until after the crash :)

bought this receiver half thinking i would use cppm on it, but it still seems dangerous. not too sure which firmware this is, anyway it's just a few bucks more over the original one here

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bought this receiver half thinking i would use cppm on it, but it still seems dangerous. not too sure which firmware this is, anyway it's just a few bucks more over the original one here

Very happy with this receiver

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very happy with this receiver

Good Reviver. works perfect with the 9xr-Pro

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good Reviver. works perfect with the 9xr-Pro

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
D8R-XP Manual Download [85]
EZosd RSSI Instal Download [1437]
D8RSP Manual Download [83]
RSSI outpin for the D8RSP Download [954]
Manual de Instruções para FrSky D8R-XP Download [86]
FLD-02 When A1 and x pins are jumped Download [252]
Manual de Instruções para FrSky D8R-XP Download [86]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking