FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again!
New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times per second in the 2.4GHz band. This means that the system is completely resistant to interference in that band.
Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility.
Easy to bind and very fast link-up.
Excellent reboot time.
True Diversity with two antennas.
All channels can be programmed with Failsafe, quickly and easily.
Quick and extremely stable in performance.
Precise and smooth servo response.
Extended range (1.5km-2.5km).
Operating voltage: 6.0V-13.0V (can handle 3S!)
Power consumption: 50mA
Output Power:: 60mW
Resolution: 3072 (11bit)
1 x 8-channel DIY transmitter module V8HT
1 x Transmitter Antenna
Hmotnost ( g )
Blinding is a little tricky,but works as expected :)Todavia no lo he instalado pero otros compaeros ya lo han probado y va perfectamente. Hay que hacer dos pequeos taladros en la emisora para sacar el led y el pulsador.Bought 2 of these both works great. Works as advertised but the manual and any information on the internet does not mention that the led indicating that power is on flickers. The flickering is supposed to be present and tells you that the PPM pulse is connected to the module propperly. So, normal operation = orange flickering, range test = green flickering and Binding = red flickering. Great product got my JR X-347 into the future and can be used for many years to come.Hey, i have bought this product and now, i dont know wiche reciever i can use. Can i use this "FrSky V8FR-II 2.4Ghz 8CH Receiver (HV)" or is it only for TelementryHello friends, I need help, this module is compatible with this receiver???
Thank you.great for range very powerful easy to install and cheapI updated a 1990 Ace Nautical Commander boat radio with this module. I am amazed that I was able to convert this old radio to modern 2.4Ghz for under $15 USD.
It was unbelievably simple to do. If anyone is feeling hesitant about 'doing it yourself', don't. It's truly a quick and easy process.
Well, it's in and the radio works perfectly with it. I am using the FrSky 7-channel receiver. Everything bound up nicely just like the instruction sheet said it would.
See the files section for a photo of my customized Nautical Commander.hello guyz i have found this usefull info about module http://www.frsky-rc.com/ShowNews.asp?id=37 please let me know should i try this on FrSky V8HT 2.4Ghz DIY Modulehola amigos estoy interesado en montar este modulo en mi emisora sabe alguien si se puede montar en kds 7x y podrais decirme que receptores son compatibles GRACIASContinuation:
After use the plug must be pulled out to switch off the transmitter and the power for the DIY must be switched off.with the slide switch.
The order of the channels is not such as in FrSky system (1 = aileron, 2 = elevator , 3 = throttle , 4 = rudder), but as in range ( 1 = throttle,, 2 = aileron , 3 = elevator, 4 = rudder ).
If the plug of the module is plugged off, the transmitter works normally with Spektrum receivers.
Thats all, is simple to build, costs about 25 $ and works just fine.
FRSky DIY MANUAL download now [1111kb] FrSky IN JR XP6102 download now [83kb] FrSky Bind Routine download now [9kb] Turnigy9X Frsky DIY download now [2139kb] Turnigy9X Switch Frsky DIY download now [2048kb] Futaba FP-T4NL download now [478kb] 233262803X496977X30.jpg download now [339kb]