TURNIGY, the name synonymous with performance, reliability and innovation is excited to release a powerful new battery chemistry in the Turnigy Graphene!
What does this really mean for you? Well not only do Graphene batteries go harder for longer but they're unlike anything you have seen or used before.
Turnigy Graphene packs utilize carbon in the battery structure to form a single layer of graphene just 0.335nm thick, making that type of battery substrate the thinnest known to mankind. The graphene particles form a highly dense compound allowing electrons to flow with less resistance compared to traditional Lipoly battery technologies.
The result is a battery capable of maintaining greater power output whilst remaining much cooler under load. Since heat and resistance are the natural enemy of batteries Graphene chemistry has significantly reduced these problems and the result is an incredible boost in cycle life.
Turnigy Graphene batteries are the new standard for serious hobbyists who require POWER ON DEMAND.
Voltage: 1S1P / 1 Cell / 3.7V
Discharge: 65C Constant / 130C Burst
Weight: 15g (including wire, plug & case)
Balance Plug: -
Discharge Plug: JST-SYP-2P
Note: Graphene LiPo Batteries only require a standard Lipo battery charger.
Advantages over traditional Lipo batteries.
• Power density: 0.15-0.17kw/kg (5Ah-16Ah)
• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
• Stable High pack voltage through duration of use.
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life 600+
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
Amazing little batteries, they stay cool and let out a good constant flow of power. When charging mine only pack around 450mah though but compared to similar spec'd lipos these last more than twice as long and pack a good punch of power when needed ALL THE TIME! i would be great if HOBBYKING made a 300mah version for the walkera ladybird!! :)Maybe Preach'in to the choir here...
The "Bolt" line of batteries is superior to the "Graphene" line in every way except in a function that I cannot test... longevity. For those running 1s, get your hands on a 3s/2s bolt, disassemble and see what you get.This battery is good. It gives great punch to my brushed micro's. Out performs all my other 1s batteries.Excellent battery! Lives up to the hype. I had to make sure and watch my voltage while flying because I didn't notice ANY voltage sag, aka sag in power the whole flight. While all my other batterys get warm or even hot from flying hard, these stay nice and cool. I have a feeling these batterys are going to be a new standard for micro quadcopter flyers like myself!