New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Graupner Hydroplane 3D

Graupner Hydroplane 3D

Discontinued Product

Please continue searching for a similar product.
SKU:
G-9556
WANT FREE SHIPPING? Click here to find out more!

Hydroplane 3D

Product information
The Graupner HYDROPLANE 3D is a total fun model, because although it looks just like a typical hydroplane racing boat, it is actually capable of fully controlled flight! Now you can amaze your friends at the lakeside: operate the model completely "normally" at first, i.e. as a boat, but then simply lift off - and the model is transformed into an aircraft. The ABS planing skidseven make it possible to take off and land on grass. It is simply the perfect fun plane and holiday model. The HYDROPLANE 3D exploits "full-house" control, and is fully controllable in flight. This does mean that would-be pilots should have some prior experience with aileron-equipped models. The aeroplane is quick and easy to assemble from vacuum-moulded and laser-cut Depron® components. The reinforcing strutsare lightweight, high-strength CFRP profiled strips, ensuring a low all-up weight.


Pack contents
Building instructions in German, English and French, pre-trimmed vacuum-moulded fuselage and floats, ready for gluing, laser-cut wing and control surface panels, profiled CFRP braces, CFRP motor mount tube, laser-cut plywood motor mount and reinforcements, laser-cut ABS skids, control surface pushrods and linkage components, accessoriesand decal sheet.
 
Specification
Length approx. 790 mm
Width approx. 550 mm
Height approx. 220 mm
All-up weight incl. RC approx. 235 g
Total surface area loading approx. 11 g/dm²

  • SKU G-9556
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost 1600.0000
  • Délka 0.00
  • Width 0.00
  • Výška 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Land or sea, this one does it all

Modeled after modern hydroplane race boats, the new Graupner Hydro Plane3D certainly looks like a boat at first glance. It has sponsons and a hull like a boat. The Hydro Plane is modeled after modern turbine-powered hydroplane race boats capable of extremely high speeds. In reality, they spend most of each race barely touching the water, flying in ground effect. This one is different, though, as it actually flies higher, and very nicely, too. The Hydro Plane 3D is one of the most unique park flyers I have ever flown. It is a semi-scale hydrofoil boat that operates in all three dimensionsthis one flies! Through the use of laser-cut and molded foam parts, the Hydro Plane builds quickly and is relatively durable. Loops, rolls, inverted, and harrier flight are all possible with this flying boat. The stunned look of amazement from onlookers is priceless as the Hydro Plane cruises the lake as a boat, then jumps effortlessly into the air!

First flights for the Hydro should be done over soft ground with a hand launch from a helper. I chose a ball field with soft grass and no obstructions. That the Hydro looked more like a boat than an airplane didnt inspire the confidence I am used to with a new model, but I couldnt have been more wrong. From the first toss, the Hydro has been very stable! With 1/2 throttle and a gentle toss, the Hydro was off under its own power. I found it to be very responsive in roll and pitch with the stock control throw

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Land or sea, this one does it all

Modeled after modern hydroplane race boats, the new Graupner Hydro Plane3D certainly looks like a boat at first glance. It has sponsons and a hull like a boat. The Hydro Plane is modeled after modern turbine-powered hydroplane race boats capable of extremely high speeds. In reality, they spend most of each race barely touching the water, flying in ground effect. This one is different, though, as it actually flies higher, and very nicely, too. The Hydro Plane 3D is one of the most unique park flyers I have ever flown. It is a semi-scale hydrofoil boat that operates in all three dimensionsthis one flies! Through the use of laser-cut and molded foam parts, the Hydro Plane builds quickly and is relatively durable. Loops, rolls, inverted, and harrier flight are all possible with this flying boat. The stunned look of amazement from onlookers is priceless as the Hydro Plane cruises the lake as a boat, then jumps effortlessly into the air!

First flights for the Hydro should be done over soft ground with a hand launch from a helper. I chose a ball field with soft grass and no obstructions. That the Hydro looked more like a boat than an airplane didnt inspire the confidence I am used to with a new model, but I couldnt have been more wrong. From the first toss, the Hydro has been very stable! With 1/2 throttle and a gentle toss, the Hydro was off under its own power. I found it to be very responsive in roll and pitch with the stock control throw

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!