Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

GWS Brushless Outrunner 001A 2160kv 27g (2205/15T)

GWS Brushless Outrunner 001A 2160kv 27g (2205/15T)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Váha:
45 g
SKU:
GWBLM001A
Popis
produktu

GWS Brushless Outrunner Motor
Model: GWBLM001A
Voltage: 7.4v
No Load Current: .7A
Kv: 2160
Shaft Diameter: 3mm
Outer Diameter: 28mm
Weight: 27.2g/.96oz

Product
Specifications

Další informace

  • SKU:
    GWBLM001A
  • Brand:
    nedefinováno
  • Hmotnost ( g )
    45.00
  • Délka
    0.00
  • Width:
    0.00
  • Výška:
    0.00
  • Kv (rpm / v)
    0.00
  • Maximální proudy (A)
    0.00
  • Výkon ( W ):
    Ne
  • Délka B ( mm ):
    22.00
  • Může Délka D ( mm )
    9.00
  • Maximální napětí ( V)
    0.00
  • Hřídel A ( mm ):
    3.00
  • Unit Weight (g):
    nedefinováno
  • Průměr C ( mm )
    28.00
  • Celková délka E ( mm )
    52.00
  • Odpor ( mh):
    0.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This great motor was used with GWS 6x3 prop, HXT 2S1P 1300mAh battery and I put this set on Ugly Stick (weight 260g). It was very good 'cause I can fly for several minutes (around 40 average).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor works fantastic. It is very smooth running and quiet, but extremely powerful. Using a 3s1320mAh TP pack and a 9X6 APC propeller it develops 110 watts in flight at 11 amps. One warning is that it should be used for less than five minutes at WOT for motor longevity. Excellent power at a low cost.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Do you want up to 40 minutes flight time with Piper Pico J3 from GWS?

This motor 2205 is a must, with prop 8X4.3 and bat 1600mA it will reach this flight time performance.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
although the motor appeared nice I had prob with it from the first time I tryed to run it. I'm sure I just got unlucky with mine but it kept cutting on and off and never ran right
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i use this on my indoor blade (220g) i use a 15C 600 mah lipopach, a 12 amp ESC and a gws 8x4 thin prop. hovers great plenty of power to pull out of the hover. i also tested it with same setup but with a 8x4 gws prop, black, a little thicker and that made it go down in rpm in hovers, most likely because of too many amps thru the ESC. all in all a very good indoor motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice motor .



Low Amp drain and a lot of power for my minislinger.

With a little 2 cell lipo battery 1200 mAh I fly for more the 30 minutes.

It drain 5 A. with a 6x3 prop.



Good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super Motor, tolle Verabeitung und ein unschlagbarer Preis!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').