Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • USA

GWS EP Propeller (RD-1365 330x165mm)

GWS EP Propeller (RD-1365 330x165mm)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Váha:
125 g
SKU:
GWS-prop-RD-1365
Popis
produktu

All GWS EP Propellers Stocked!
GWS EP Propeller (RD-1365 330x165mm)
Colours vary. Not always orange



DD:Direct Drive (fast spinning) -Straight Edge
RD:Reduction Drive (Slow Fly, Outrunner or Gearbox) - Curved Edge
Product
Specifications

Další informace

  • SKU:
    GWS-prop-RD-1365
  • Brand:
    nedefinováno
  • Hmotnost ( g )
    125.00
  • Délka
    0.00
  • Width:
    0.00
  • Výška:
    0.00
  • Pitch Y ( Inch )
    6.50
  • Materiál
    nedefinováno
  • Otáčení:
    nedefinováno
  • Unit Weight (g):
    nedefinováno
  • Typ
    nedefinováno
  • čepel Count
    nedefinováno
  • Průměr X ( Inch ):
    13.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Quite agood prop. i use it with c4250 kv600 after widening the hole abit so it can screw on . works good at 5s but 6s or higher kv will be to much for the prop and it will start viberating eventualy will brake off. but gives 500w easely i think thrust of 1750g if i remember good. great for multycopter because its thin it reacts fast and safer for motor shaft and user. great little prop
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good prop if you have the right gearbox. comes in 6 pack very powerful.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Boa helice para ser usada com reducao.



Nao da para usar em motores direct drive (sem recucao) por ser mole demais.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought these for the use in a 1,5 kg scratchbuilt 3d foamy, not sure if they would work with a Turnigy 35-48 1100 kv. With a little bit of drilling(from 3 to 6mm) & grinding, they actually work very well ~ 700w on 4s. The core/base is very thin though, & the blades are soft - compared to the much stiffer APC, JXF, JM etc props. Thus, if you bump in to something - these wont make the alu prop shafts bend - so easily...
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').