New Items Novinky Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

HD3011-1900KV Indoor/Profile/F3P Outrunner Motor

HD3011-1900KV Indoor/Profile/F3P Outrunner Motor

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
HD3011-1900
WANT FREE SHIPPING? Click here to find out more!

These superb little shockie motors offer great performance and great value for money. Hand wound and balanced these super light weight motors are fantastic for the lightest of light indoor 3D profile and F3P models. Equipped with 2mm gold plated bullet plugs and a super light Carbon fiber motor mounts these motors are ready to bolt in and take off!

Features
Light weight design.
Strong and light CF motor mount.
Pre-installed 2mm gold connectors.
Built in prop saver.

Specs.
RPM/kv: 1900
Idle Current: 1.5A
Lipoly: 2~3s
Max current: 7A
ESC: 10A
Suggested prop: 8x4
Thrust: 280g
Shaft size: 3mm
Weight: 22.6g (True weight including wires and connectors)
Mount dimensions: 35mm x 35mm

Includes.
3 x 2mm Female connector
2 x Prop saver bands
1 x CF Motor mount
3 x Pre-cut shrink tubes

  • SKU HD3011-1900
  • Brand -
  • Hmotnost 55.0000
  • Délka 120.00
  • Packaging Width 28.00
  • Výška 45.00
  • Kv (rpm / v) 1900.00
  • Maximální proudy (A) 7.00
  • Odpor ( mh) 0.00
  • Maximální napětí ( V) 11.00
  • Výkon ( W ) 52.00
  • Hřídel A ( mm ) 2.00
  • Délka B ( mm ) 14.00
  • Průměr C ( mm ) 30.00
  • Může Délka D ( mm ) 6.00
  • Celková délka E ( mm ) 22.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Clik Ng Superlite. Dieses Modell wird den Motor bekommen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Clik Ng Superlite. Dieses Modell wird den Motor bekommen.

The reason for 2 stars is because it looks great. However, the motor basically does not run. Even if it turns, it is very rough and will not turn if you put a 8x3.5 SF prop. Hobbyking asked me to send both photo and video to show the problem and I did, but still have not heard final decision.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The reason for 2 stars is because it looks great. However, the motor basically does not run. Even if it turns, it is very rough and will not turn if you put a 8x3.5 SF prop. Hobbyking asked me to send both photo and video to show the problem and I did, but still have not heard final decision.

Very good and cheap motor! Well machined.
This one is a POWERHD Motor ! Exactly the same color and specs!
I use it on my progress (188gr.) on indoor sessions with a 8045SFprop on 2S450mAh lipo. It has more than enough power. Maybe a 6Aplush is enough for the progress if you really want to save a few grams...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good and cheap motor! Well machined.
This one is a POWERHD Motor ! Exactly the same color and specs!
I use it on my progress (188gr.) on indoor sessions with a 8045SFprop on 2S450mAh lipo. It has more than enough power. Maybe a 6Aplush is enough for the progress if you really want to save a few grams...

WARNING!!!! The built in prop saver is too small to fit standard props. I had to create an adaptor to fit my prop!



Just finished my maiden flight on scratch built 32 inch F3P scratch build. AUW is 116 grams.

This motor performed great. Even though I had to create an adaptor. The motor sat on the scale with bullet plugs installed at 22.5 grams. Pacing it on my plane was nice and easy, and it spun up nice and smooth. I used the suggested 8x4 prop and there is plenty of power to hover my 116 gram plane. After flying the motor was cool to the touch.



I am happy with the performance of the motor. I only wish the prop saver was a standard prop size, or included an adaptor to fit a standard size. By standard, I mean the standard orange colored ones you can get just about anywhere that have a 3 letter name.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WARNING!!!! The built in prop saver is too small to fit standard props. I had to create an adaptor to fit my prop!



Just finished my maiden flight on scratch built 32 inch F3P scratch build. AUW is 116 grams.

This motor performed great. Even though I had to create an adaptor. The motor sat on the scale with bullet plugs installed at 22.5 grams. Pacing it on my plane was nice and easy, and it spun up nice and smooth. I used the suggested 8x4 prop and there is plenty of power to hover my 116 gram plane. After flying the motor was cool to the touch.



I am happy with the performance of the motor. I only wish the prop saver was a standard prop size, or included an adaptor to fit a standard size. By standard, I mean the standard orange colored ones you can get just about anywhere that have a 3 letter name.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking