New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

hexTronik PRO 120A BESC w/ PC Programmability

hexTronik PRO 120A BESC w/ PC Programmability

Discontinued Product

Please continue searching for a similar product.
SKU:
HXT120A
WANT FREE SHIPPING? Click here to find out more!

Speed Controller Features
High rate (10 KHz) switching (PWM)
3 to 6 Li-poly cells with receiver.
Dynamic braking ensures prompt prop folding.
BEC (2.0A) provides power to receiver and servos.
Over temperature protection.
User programmable Features.
Low-voltage protection - Programmable
Cutoff can be programmed for motor stop or reduced power.
Brake Type.
Throttle Range.
Timing Advance.
Safe power on arming program.
Low torque soft start?prevents damage to fragile gearboxes.
Auto shut down in 4sec after signal is lost or radio interference becomes severe.
Microprocessor controlled.
Programmable rotation.

Specifics:
This BESC has an extremely smooth throttle curve and excellent programming features. it is oneof the best quality BESC coming from China right now.
Item comes with a 12 month warranty

Max Load : 130A
Max Voltage : 6 cell 25v
BEC: 2A
Please be advised that BEC should be dissabled when more than 3 cells are used. To dissable BEC remove the middle RED wire from the reciever wire.

 

 

  • SKU HXT120A
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost 100.0000
  • Délka 150.00
  • Width 26.00
  • Výška 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

One problem with a Hacker motor B40 6L with a Graupner Propeller 14x9,5 without it work perfectlly with it, the engine don't run but the propeller oscillate ????
After a lot of verification on the motor and on the ECS i don't understand where the problem is.
The Hacker work with an other esc and the esc work with an other motor.
gremlins ?
If somebody have a answer i take it very friendly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

One problem with a Hacker motor B40 6L with a Graupner Propeller 14x9,5 without it work perfectlly with it, the engine don't run but the propeller oscillate ????
After a lot of verification on the motor and on the ECS i don't understand where the problem is.
The Hacker work with an other esc and the esc work with an other motor.
gremlins ?
If somebody have a answer i take it very friendly.

I bought one of these a while back and it never worked properly it burned up 2 motors. I want to buy another and give it a try but they have been on BACKORDER for a YEAR!!! HK STILL WAITING ......

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought one of these a while back and it never worked properly it burned up 2 motors. I want to buy another and give it a try but they have been on BACKORDER for a YEAR!!! HK STILL WAITING ......

Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?



Come on, has been ordered in August. If you will never restock it, please let your customer know. Any ETA?

runing this in a mig 3 russian soviet war bird, 61# wing span 5 cell batt, 5000mah... on the run way ready for take off total weight is 3.5kg, pulling 78 amps and 1450watts, no probs.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

runing this in a mig 3 russian soviet war bird, 61# wing span 5 cell batt, 5000mah... on the run way ready for take off total weight is 3.5kg, pulling 78 amps and 1450watts, no probs.

Excellent ESC for Powerboats.

I run it in a ECO-Expert with an Feigao 380 XL7 on 2s 4100 mAh packs.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent ESC for Powerboats.

I run it in a ECO-Expert with an Feigao 380 XL7 on 2s 4100 mAh packs.

great esc for the money . cheap and does what it is made to do . usb program work like a charm. will buy 3 more soon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great esc for the money . cheap and does what it is made to do . usb program work like a charm. will buy 3 more soon

Thiis ECS caught fire the first time I used it with 24 volts. RMA refused becaused I removed the burnt cover.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Thiis ECS caught fire the first time I used it with 24 volts. RMA refused becaused I removed the burnt cover.

Maiden voyage-Had ESC running on 2 3s1p 5kmAh 30c/50c burst LiPos connected in series with a KB 45 1200kv, on a 40" v-hull. I'd punch it the ESC would hesitate and at full throttle the motor would kill. Easing it up to speed seemed to work. After 45sec test run I checked it motor only warm, batts cold, ESC slightly warmer. After 2 mins ESC hot-not 2 bad. Let cool ran for 3mins not at full thtl low pop noisebye bye ESC-hot!! Not happy

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Maiden voyage-Had ESC running on 2 3s1p 5kmAh 30c/50c burst LiPos connected in series with a KB 45 1200kv, on a 40" v-hull. I'd punch it the ESC would hesitate and at full throttle the motor would kill. Easing it up to speed seemed to work. After 45sec test run I checked it motor only warm, batts cold, ESC slightly warmer. After 2 mins ESC hot-not 2 bad. Let cool ran for 3mins not at full thtl low pop noisebye bye ESC-hot!! Not happy

Some good news for those of you with cogging and motors that wont start up on this wonderful ESC :) Simply put you have a bad (open) connection on the AC side of the inverter (three wire side) between the motor and the ESC.



So double check your wire connections in fact you should always give the wires a tug after splicing them together regardless of whether you solder or butt-splice the wires together and if you hear any clicking or fell

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Some good news for those of you with cogging and motors that wont start up on this wonderful ESC :) Simply put you have a bad (open) connection on the AC side of the inverter (three wire side) between the motor and the ESC.



So double check your wire connections in fact you should always give the wires a tug after splicing them together regardless of whether you solder or butt-splice the wires together and if you hear any clicking or fell

very good but very large

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good but very large

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!