The HKPilot Mega master set is a complete open source autopilot and flight controller system featuring matched hardware, cables and cases for a refined plug-and-play UAV control system.
The HKPilot is based on the rapidly evolving and refined Ardupilot mega or “APM”, an open source project from 3DR robotics. This amazing flight controller allows the user to turn any fixed wing, rotary wing, or multi-rotor vehicle (even boats and cars) into a fully autonomous vehicle, capable of performing a wide range of tasks even programmed autonomous missions with waypoints, with the included high precision LEA-6 Ublox GPS.
Various user interfaces are available for programing, reviewing logs, setup and even some Apps for smart phones and tablets. The included telemetry radio, OSD, power sensor and GPS allow for full two way radio communication, giving you full control and provides live data back to your computer or tablet. The list of what this flight controller is capable of has quickly surpassed what it cannot. Feature rich settings, flight modes and supported platforms have made this the go-to UAV controller.
The HKPilot Mega master set includes: The NEW HKPilot Mega 2.7, the super precision Ublox LEA-6H GPS module with integrated compass, New style telemetry radio set for bi-directional data, updates 10s power sensor and BEC Module, minim OSD v1.1 for FPV feedback, complete matching cable sets for a plug-and-play experience and to finish the set off, cases for the flight controller, telemetry radios and GPS with pedestal mount.
This product is based on the open source APM Project from 3DR Robotics, the Cad files per the creative commons license are available under the files tab. The APM project is supported by thousands of users pushing this open source flight controller to be one of the best systems available.
• Arduino and APM Compatible
• Pre-soldered and tested
• 3-axis gyro, accelerometer, magnetometer and high-performance barometer
• Built in 4 MP Dataflash chip for automatic data logging
• Honeywell HMC5883L-TR Digital compass on board and off
• Invensense's 6 DoF Accelerometer/Gyro MPU-6000
• Measurement Specialties MS5611-01BA03 Barometric pressure sensor.
• Atmel ATMEGA2560 and ATMEGA32U-2 (processing and USB function).
• External compass support (included)
• Ubox super precision LEA-6h GPS
• IIC Input MUX port
• 10s Power module with sensor and BEC
• new style Telemetry radio and OSD included
• Cases for a nice finished look
• Matched cables for the complete set
HKPilot Mega 2.7
10s Power sensor and BEC Module ( XT-60 connectors)
Minim OSD v1.1
Ubox super precision LEA-6h GPS and Compass
Telemetry radios (915MHz)
Cases for the flight controller, Telemetry radios, GPS with pedestal mount
Complete matched cable set
Please view individual components under the related items tab for a list of respective specifications and features.
*Note: The reference to APM refers to the ArduPilot project, a family of open source autopilots based on the Arduino open source computing platform, developed by 3DR and the open source community. It consists of a choice of ArduPilot Mega (APM) electronics and a range of free software versions for different vehicles and is governed by an open source creative commons license. This product is based on the open source APM Project from 3D Robotics, the Cad files per the creative commons license is available under the files tab.
*Note: This is not an original Arduino brand product.
Hmotnost ( g )
Nice flight controller and there is a lot of information about it in the net. I configured the APM with Mission Planner and placed it in a Talon tricopter. I don't use telemetry but I do get video streaming and OSD data with a Mobius cam and gimbal. In files tab I uploaded a picture with the wiring diagram I used. Hope this help!!! Happy flying!!!Had APM fail before first Flight. Was replaced under warranty. received replacement which wasnt identical to the original. (4 pins missing from Analogue side) plugged it all in and Had a similar issue. Turns out GPS module is at fault. Just sent RMA hope to have it replaced shortly.
It's an apm 2.7 that wont hold a bootloader after a week i have to reload it and it dumps all my settings. I have found cheaper APM's on an auction site that works fine.ive been banging my head against a wall trying to get it all set up. ive had it for 4 days now and still not setup yet. very frustratingI do like the APM the only thing that is a problem is the GPS. Good GPS bad connector. I flew a few times no hard crashes. Did come down a bit hard one time and broke a leg on my landing gear. So the connector, was flying and battery was low. So landed and swapped the battery.Took off was doing some testing off the different modes and lost GPS. The Quad took off like a bat out of hell. Was able to get it back into Stable mode and land before a crash. Took apart the GPS case and the connector has come off the unit. So if you get one of these best before use. Take apart the GPS housing and use a bit of hot glue or something to keep the unit still inside. As it can move a little. I think this little bit of movement broke the connector off.Just loved this 2.7 version... much better than my old 2.5... Will buy more if need for sure! Perfect loitter with this GPS! Buy it. I prefer APM then DJI...This is an excellent package. Just set it up on one of my quad on wow. I am blown away. Alt hold = great, loiter mode = Amazing. I even tried RTL and let the copter land it self and it did very well. I did about 6 RTL where it would land roughly between 30-100cm away from where it took off. I can not complain. I will however advise you to read through the documentation available from the apm website. Also be sure to select 180 rotation on the compass if you use the external one! Thanks HK !! Thanks APM !! Will buy another for my hex sometime down the line!