Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

HKS-9257 High Speed Servo 4.5kg / 0.07sec / 25g

HKS-9257 High Speed Servo 4.5kg / 0.07sec / 25g

QTY:

Now save Uložit 0,00 € 0,00 €

9,29 €
Stock:
Váha:
43 g
SKU:
HKS9257

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Popis
produktu
HKS-9257 is a high speed, high torque digital servo, Suitable for HK500/Align Trex-500 size Helis.

Specs:
Dead band: 0.002ms (Default)
Control System: +Pulse Width Control
Working frequence: 1520μs / 80hz Digital mode/Analogy mode
(RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8~6.0 Volts DC
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.08 sec/60° degrees at no load
Operating Speed (6.0V): 0.07 sec/60° degrees at no load
Stall Torque (4.8V): 3.8 kg.cm
Stall Torque (6.0V): 4.2 kg.cm
360° Modifiable: NO
Motor Type: Coreless Motor
Potentiometer Drive: Indirect Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Gear Type: Plastic gear
Programmable: YES
Connector Wire Length: 18.0
Dimensions: 36x15.3x21.8 mm
Weight: 25 g
Spline count: 25

 


Equipped with two ball bearings.
For use with the Futaba GY401 (FUTM0807, FUTM0808) and the GY502 gyros.
Does not work with these Futaba radios (4FG, 5FG/K, 6FG, 6FG/K, 7FG/K New Terratop, 3EGX, 3PGE, 2NL, 2LGX, 2FR, 2PK series) These radios have a servo neutral signal of 1310us not compatible with this servo.
Do not use with AM radios.
 
 
 
 
Product
Specifications

Další informace

  • SKU:
    HKS9257
  • Brand:
    Ne
  • Hmotnost ( g )
    43.00
  • Délka
    130.00
  • Width:
    15.00
  • Výška:
    90.00
  • Rychlost ( Sec / 60deg )
    0.07
  • Točivý moment ( kg) (min . 0,01 kg )
    4.50
  • Unit Weight (g):
    25
  • A ( mm ):
    33.00
  • B ( mm )
    36.00
  • C ( mm )
    30.00
  • D ( mm ):
    15.00
  • E ( mm ):
    49.00
  • F ( mm )
    20.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Seems to be a good servo. Got 1 that was bad from the start, didn't move correctly and finally stopped working before I even got to fly. bought two extras for replacements just incase.
Quality
Value
Overall
Quality
Value
Overall
nice servo for tail 500 size
Quality
Value
Overall
Quality
Value
Overall
Leider nicht besonders solide. Fr ein 1,60 m 3D Modell definitiv nicht geeignet, obwohl die Servogre es htte vermutenlassen.
Quality
Value
Overall
Quality
Value
Overall
great servo centers fine en lighting fast crispy controles.

works fine on a 450 size heli! but keep youre gyro on standard frame rate! so for those who usen a 401 type gyro etc

higher frame rates will cause damage!
Quality
Value
Overall
Quality
Value
Overall
Ich habe den Servo in den T-Rex Kolne asl Heckservo eingebaut. Von oben in den Halter hat aber nicht geklappt, weil dieser etwas hoch in der 24g klasse ist. Von unten hat aber wunderbar geklappt.
Quality
Value
Overall
Quality
Value
Overall
Purchased and installed on a hk500cmt tail. I only used it for approx 5 minutes before the servo stripped out. I was running 5.5v to the servo and this servo said it can handle 6v. I wouldn't recommend this servo.
Quality
Value
Overall
Quality
Value
Overall
Fast and reliable servo, great combination on blade 400 with 401B AVCS. Must mount on additional tail boom holder for servo.
Quality
Value
Overall
Quality
Value
Overall
I bought this servo for HK450 PRO v2 as a tail servo. It`s not a straight fir. I need to adjust the corners on the mounting plate of the heli to fit.
Quality
Value
Overall
Quality
Value
Overall
gzel bir rn verilen reti hakediyor
Quality
Value
Overall
Quality
Value
Overall
Benutze dieses Servo seit 6Monaten an der Taumelscheibe u. am Heck im HK500. Laufen super, stellen genau zurck, gab nie irgendwelche Probleme. Ich fliege allerdings kein 3D. Kann ich nur empfehlen.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
tech specs download now [43kb]

Combine

essential items and
acc

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').