New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Hobbyking 100amp OPTO ESC with 5 Amp External UBEC

Hobbyking 100amp OPTO ESC with 5 Amp External UBEC

Discontinued Product

Please continue searching for a similar product.
SKU:
9261000015
WANT FREE SHIPPING? Click here to find out more!

Here's an ESC for those that like to push their equipment a little - hotliner and EDF pilot's this means you!

The Hobbyking 100amp ESC is Opto-isolated from the receiver, meaning that it has no internal UBEC to power your receiver and servos.

Historically, you would need to purchase either an external UBEC or a separate receiver battery to complete your power system when utilising an Opto-coupled ESC.

Not any more - We have a solution! This ESC is supplied with a pre-wired 5amp external UBEC, not just any UBEC, this is jumper adjustable to provide 5, 5.5 or 6 volt output to your radio equipment. The UBEC is wired directly to the battery input cables to the ESC.

This arrangement will add a margin of safety to high powered (or highly strung) models. In the event that the ESC was to fail, the receiver and servos will remain powered and the pilot should be able to land his model safety.

The only incident this system won't safeguard you against is Lipo cell failure - Always be sure your Lipo's are up to the task at hand and that you are drawing less than their rated 'C' current.

User programmable features:
Brake Setting: On/Off
Setting for battery type: LiPo  or NiCd /NiMh
Low-voltage protection : low / medium / high
Motor timing setting: low/medium/high
Start up type: soft/medium/hard
Mode: Normal or Helicopter mode
Motor rotation: cw/ccw
PWM operating frequency: 8KHz / 16KHz
LVP type: slow down or dead cut


Specs:
Continuous current: 100A
Max current (10 seconds): 150A
Input Voltage: 2-6s LiPo (7.4- 22.2v)  / 5-18 NiMh
BEC type: OPTO/UBEC 5amp (external)
Standard configuration: 5.5V/5A (external)
Jumper setting: 5/5.5/6 volts
Dimensions: 70*32*20 mm
Weight:108g

  • SKU 9261000015
  • Brand HobbyKing
  • Kapacita ( mAh ) -
  • Hmotnost 122.0000
  • Délka 170.00
  • Packaging Width 25.00
  • Výška 140.00
  • HK Opto UBEC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

You get what you pay for?
Mine worked for about 2 minutes. Then it suddenly died (no warning no explanation).
Now i need to go buy something new. Maybe choose something more expensive and hope it works for more than 2 minutes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

You get what you pay for?
Mine worked for about 2 minutes. Then it suddenly died (no warning no explanation).
Now i need to go buy something new. Maybe choose something more expensive and hope it works for more than 2 minutes.

Works great bought and had under estamated my setup plane pulls 95 amps and peeks well past the limits i know im messin with fire but its held up very well so far waiting for it to die on me its a great value the proper esc would cost more then plane is worth so if it dies it die.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great bought and had under estamated my setup plane pulls 95 amps and peeks well past the limits i know im messin with fire but its held up very well so far waiting for it to die on me its a great value the proper esc would cost more then plane is worth so if it dies it die.

Installed in a HK550 6S setup. The BEC fried on the third power up, as I was installing the electronics. I opened the heatshrink covering the BEC. A yellow surface mount capictor (I think), blew out. It shot a spark about 2' into the air! I clipped it off and threw it away and ordered the Turnigy 8A-15ABurst UBEC. So far so good with this one. I mis-clicked on the overall rating it should have been 2 Crowns.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed in a HK550 6S setup. The BEC fried on the third power up, as I was installing the electronics. I opened the heatshrink covering the BEC. A yellow surface mount capictor (I think), blew out. It shot a spark about 2' into the air! I clipped it off and threw it away and ordered the Turnigy 8A-15ABurst UBEC. So far so good with this one. I mis-clicked on the overall rating it should have been 2 Crowns.

ENCORE aucune documentation !

AUCUNE indication concernant l'une ou l'autre carte de rglage.

On devine et on vole ainsi ou on jette le bidule la poubelle (ce serait peut-tre plus prudent, non ?)

mv

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ENCORE aucune documentation !

AUCUNE indication concernant l'une ou l'autre carte de rglage.

On devine et on vole ainsi ou on jette le bidule la poubelle (ce serait peut-tre plus prudent, non ?)

mv

Customer files
Spec and jumper settings Download [125]
No File Name Download [32]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!