New Items Novinky Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Hobbyking&#8482 Slowfly Propeller 11x4.5 Black (CW/CCW) (4pcs)

Hobbyking&#8482 Slowfly Propeller 11x4.5 Black (CW/CCW) (4pcs)

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 1,69 € 1,69 €

Special Price 3,70 € 3,70 €

You save Uložit 1,69 € 1,69 €

Was  5,39 €

Stav:
Skladem
SKU:
125000081-0
WANT FREE SHIPPING? Click here to find out more!

Thanks to the nylon material used in construction these propellers offer increased performance and efficiency making them perfect for your multi-rotor project. These 11x4.5 inch props are incredibly stiff compared to other plastic propellers available and are precision molded to ensure optimum balance from the factory. They feature multiple prop adapters to enable these props to fit any prop shaft from 3mm to 6.5mm diameter. 

Specs:
Diameter: 11 inch
Pitch: 4.5 inch
Hub Thickness: 6.6mm
Shaft Diameter: 3~6.5mm (with adapters)
Weight: 16g each propeller

Note: These props are for electric use only.

  • SKU 125000081-0
  • Brand HobbyKing
  • Hmotnost 95.0000
  • Délka 290.00
  • Packaging Width 20.00
  • Výška 90.00
  • Průměr X ( Inch ) 11.00
  • Pitch Y ( Inch ) 4.50
  • Otáčení CW/CCW
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I've been using 10x4.5 props on my quad copter, which is quite heavy, and it works pretty well, just about 50 to 60pcnt throttle to hover. I tried these 11x4.5 props, and my quad would not even lift off at well over 80pcnt throttle. I took them off immediately. Not happy with them at all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've been using 10x4.5 props on my quad copter, which is quite heavy, and it works pretty well, just about 50 to 60pcnt throttle to hover. I tried these 11x4.5 props, and my quad would not even lift off at well over 80pcnt throttle. I took them off immediately. Not happy with them at all.

Very brittle, very hard to balance

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very brittle, very hard to balance

ABSOLUTELY AWFUL PROPELLERS!

Keith says it well in the comments:
''The pitch angle is positive near the root, then goes negative near the tips! This is a terrible design and sacrifices a LOT of performance.''

Basically half the propeller is pushing air one way, the other half is fighting against it and pushing the other way. A good propeller should push the air in the same direction along the whole plane of the blade. These do not.

HobbyKing sell plenty of other propellers that are decent, unfortunately these are not one of them.

Here's what a prop should look like:
https://i.imgur.com/KZZn0UZ.jpg?1
Here's what these look like:
https://i.imgur.com/ObgPPcw.jpg?1


AVOID THESE PROPS, they are massively flawed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ABSOLUTELY AWFUL PROPELLERS!

Keith says it well in the comments:
''The pitch angle is positive near the root, then goes negative near the tips! This is a terrible design and sacrifices a LOT of performance.''

Basically half the propeller is pushing air one way, the other half is fighting against it and pushing the other way. A good propeller should push the air in the same direction along the whole plane of the blade. These do not.

HobbyKing sell plenty of other propellers that are decent, unfortunately these are not one of them.

Here's what a prop should look like:
https://i.imgur.com/KZZn0UZ.jpg?1
Here's what these look like:
https://i.imgur.com/ObgPPcw.jpg?1


AVOID THESE PROPS, they are massively flawed.

Buone eliche., economiche e ressistentissime.Ricordatevi di bilanciarle

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Buone eliche., economiche e ressistentissime.Ricordatevi di bilanciarle

very good stuff ... very easy to use ... you need this stuff .... I wear this item on my motor quapcoter with dt750

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good stuff ... very easy to use ... you need this stuff .... I wear this item on my motor quapcoter with dt750

good props, just a bit small for what I needed. will keep them for future builds. very well balanced.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good props, just a bit small for what I needed. will keep them for future builds. very well balanced.

These props are way too heavy........I've run other 11" props fine on my tricopter DT750 3S but wanted something a bit more rigid....these heavy props drain my lipo in about 5 mins or less and barely gets off the ground with full throttle.....whereas I was getting 12 to 15 minutes on other 11" plastic props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These props are way too heavy........I've run other 11" props fine on my tricopter DT750 3S but wanted something a bit more rigid....these heavy props drain my lipo in about 5 mins or less and barely gets off the ground with full throttle.....whereas I was getting 12 to 15 minutes on other 11" plastic props.

I bought 2 packs of these props and they are really awful. HK should have controlled these before selling them. These are manufactured NOT correctly. They are thick, rough, heavy and give absolutely NO LIFT!! Now I want to return them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 2 packs of these props and they are really awful. HK should have controlled these before selling them. These are manufactured NOT correctly. They are thick, rough, heavy and give absolutely NO LIFT!! Now I want to return them.

I bought 2 packs of these props and they are really awful. HK should have controlled these before selling them. These are manufactured correctly. They are thick, rough, heavy and give absolutely NO LIFT!! Now I want to return them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 2 packs of these props and they are really awful. HK should have controlled these before selling them. These are manufactured correctly. They are thick, rough, heavy and give absolutely NO LIFT!! Now I want to return them.

Im not sure of all the designations but these had less lift than than the 10x4.5 SF plastic props. I know these are 1045E. Not sure what the E is. My quad lifted at 45pcnt throttle on 1045sf plastic. It needed about 55pcnt to lift off with these. Maybe the designation is the cause for a bigger prop with same pitch to need more throttle

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Im not sure of all the designations but these had less lift than than the 10x4.5 SF plastic props. I know these are 1045E. Not sure what the E is. My quad lifted at 45pcnt throttle on 1045sf plastic. It needed about 55pcnt to lift off with these. Maybe the designation is the cause for a bigger prop with same pitch to need more throttle

  1. 1
  2. 2
Customer files
No File Name Download [987]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking