When pulling power matters and looks.. well.. just dont, then the HobbyKing Donkey ST3511 motor and esc combo is the work horse for you. This tough-as-rawhide motor features a heavy duty mount, a 5mm shaft and self oiling bushings that just wont give up like some of the bearings in those little "Show Pony" motors.
Dimensions: 42 x 29.5mm
Voltage: 6v~18v (2~4s lipo)
No-load current: 2.0A
Max Current: 35A
Max Watts: 360W
Mounting Holes: 52mm
ESC: 30A with XT60
12x6 - 11.1v - 25A - 1450g Thrust
Hmotnost ( g )
Kv (rpm / v)
Maximální proudy (A)
Výkon ( W ):
Délka B ( mm ):
Může Délka D ( mm )
Maximální napětí ( V)
Hřídel A ( mm ):
Unit Weight (g):
Průměr C ( mm )
Celková délka E ( mm )
Odpor ( mh):
Moteur installé dans une sorte de Cessna de 1.20m d'envergure fabriqué en dépron couplé à une hélice 12x6, bonne performance, moteur très coupleux, prévoir un porte hélice pour axe moteur diamètre 5mm.
Pour le prix c'est parfait.Powerfull set up for the greatest price!
I used in a Scratch Build model to carry and Drop a R/C Skydiver and tow some small gliders.What a deal, a strong and versatile motor with a speed control for 500-1000g planes. I use a 12 x 6 prop and find it pulls well.EXCELLENT MOTOR AND ESC COMBO!!! HK please sell out of all locations. This is a GREAT VALUE!
I've installed in on my Horizon Hobby Super Cub and it's much more than ample power to weight ratio.
ONE COMPLAINT - you can't fix the shaft, as it's press fit into the bell.
Issue Two - the wires from the ESC to the motor winding won't take solder to save your life...not sure why...it's totally weird.
P.S. I've got 3 now (one is now passed away after a nose dive with a little throttle for extra excitement...and it worked till the second nose dive!!!)I have Crashed head on to the ground several times but this motor is really tough it is still running smoothly. I even pushed the shaft backwards it did not even bend, and i have to hammer it our to its original Position .. REALLY tough Motor... not to mention its powerful, the only inconvenience is that the ESC is permanently soldered, but I just cut it and put bullets connectors... Worth the money.for a motor of this size this is really the best price you can get for one of these. these do come with bushings however witch arent as good as ball bearings. however if you really want to you can put ball bearing in this motor.
A problem is if you power up your ESC with the throttle NOT all the way down, you can start the programming sequence. (Same as the HK blue ESC's) . So this problem is fixed by "default parameter" PS: A program-card is a good investment! BUT-T ****- Then the last problem: if you make the throttle-up mistake and lower the throttle after the first 4 beeps, that is the throttle-calibration is messed up.i fitted the motor in a home made swamp boat! very powerful motor, and very cool ESC. This product is a value for money.awesome motor and esc combine. work great with 12x6 prop. i used it on a pusher homemade plane but dman thrust broke the tail connections. it has sooooo much power for the Amps it uses and of course price! get it! never regretGewicht 165g alles zusammen
Kabel Motor zu ESC 7cm
Kabel ESC zu 10cm inkl XT60 Buchse
Motorkreuz aussen 62mm
freie Achslaenge Motor 19mm
Motorspant bis freie Achse 33,5mm
Empfaengeranschlusskabel inkl Stecker 19,5cm
gut ausgefuehrt, Kabel ausreichend dimmensioniert und elastisch