Introducing the HobbyKing FPV250 Ghost V4 edition drone, a mini sized drone with big FPV and night flying fun capability.
The FPV250 is a mini sized FPV drone measuring in at a mere 250mm. This durable, inexpensive FPV multi-rotor platform is perfect for FPV racing or obstacle course flying and at your local field, and now with the full arm length upper facing LEDs that light the translucent frame and props for orientation and the ultra-bright down facing white LEDs making the entire frame glow in the night sky and even more visible in the day. The Included center power distribution board also has a built in 5V UBEC system for aux component use.
The one-piece frame is extremely durable, giving you the confidence to go FPV barnstorming and yet only weighs 110 grams. The front platform is designed to handle up to a 2 servo pan and tilt camera setup and the rear platform supports the video transmitter, to keep it all nice and balanced. The FPV250 has a center bay large enough for most popular flight controllers and includes a top crash cage for protection. There are four integrated strap slots on the bottom to securely hold the battery in place for high G maneuvering. The FPV250 motor mounts can handle anything from a 1506 to 2208 motor and the vented arms provide plenty of cooling for your 7~12A ESCs.
The HobbyKing FPV250 is a budget minded FPV basher, ready for daredevil obstacles or Spec ClassFPV racing and now night flight fun. It’s time to start practicing your FPV skills, race season is getting ready to start!
• Ultra bright full arm length frame mounted LEDs
• All clear frame that grabs the LED lights and glows
• included clear propeller that illuminate with the upper facing LEDs
• Built in 5V UBEC and PDB
• One piece construction for durability
• Large 55x55mm cage protected flight controller bay
• Mounting Support for a 2 servo pan and tilt camera and video transmitter
• Wide range of motor and power options
• Removable landing gear
• Included Clear 5030 prop set
Height: 106mm with landing gear and center cage
4 x Motors 1506~2208
1 x Battery 800~1300mah 7.4~11.1V (2 or 3 cells Lipoly)
4 x ESC’s 7~12A
1 x multi-rotor Flight controller
4ch radio (6ch recommended for FPV and FC use)
FPV gear (optional)
Kapacita ( mAh )
Hmotnost ( g )
Motor mounts holes are not working for FPV 250 Hobbyking Spec. I had to drill another 4 holes for every of the 4 motor mounts. I thought this will be a Plug and Play, but not :-( On the other hand it works like a charm when its done. Nice lights. Didnt used the PDB with the lights on, will use it on another project.This was a replacement for the black frame of same design. Having a large number of LEDs has not noticeably reduced flight time. A huge benefit however is the identification of orientation when learning to fly, plus it looks cool.
One design flaw is the PDB blocks off the mounting positions for smaller flight computer boards like the Naze32 - requires some creative thinking to overcome.absolutely amazing led kit, impressive to see this fling in the night :)Very bright and nice at night. Needs to drill 4 holes to fit a naze32. You have to drill the holes thru the bottom right thru one of the LED's. 3 of the LED's at this end will stop working, but doesnt matter. Then you can mount the PDB and above the mounting plate Produkt ID: 9171000569-0 . I will add pics to the "files tab".
I cant say anything about durability, because I dont use it as a FPV racer.
I would recommend it for cruising at night, espacially for kids. They will love the LED's.super bright. come with pcb and 5v out.Good! Very good and strong quality!I just finished completing a build with one of these kits. Overall, I am very pleased with the frame and the kit. The quality of the parts is nice. The plastic used to make the frame has some flex to it. I was hoping there would be some flex in the plastic so that the frame would not be brittle, leading to a broken frame on the first crash. The LEDs are quite bright and the circuit boards they are mounted on are of good quality.
My problems with the kit are as follows: 1) There are not usable provisions in the frame design to allow mounting the PDB on the bottom and then a flight controller board on the top of the PDB without running into issues 2) The included motor adapters for use with 18mm motors have only three holes around the perimeter of the mount to secure it to the arm which has four holes...only one will line up properly and no hardware is included to mount the adapter to the arm 3) Even with the shortest stand-offs possible between the PDB and the flight controller board, there is no way to fit the guard across the top of the flight controller because of the flight controller board sitting up too high 4) No prop adapters are included with the clear propellers...fortunately the adapters from Gemfan props fit perfectly.
Of course, all of these "Problems" are easily overcome with a little creativity and should be expected on any scratch-built multicopter.
Bottom view, lights off. Mount the LED's download now [2175kb] Bottom view lights on download now [1813kb] top view lights on download now [1591kb] top view lights off download now [2333kb]