Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat

Hobbyking ME109 Combat EPP 880mm (ARF)

Hobbyking ME109 Combat EPP 880mm (ARF)

Now save Uložit 0,00 € 0,00 €

31,79 €
Není skladem!
Stock:
OUT OF STOCK
Váha:
996 g
SKU:
BF109-EPP-KIT

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu

This great looking ME109 is made from virtually unbreakable EPP foam and is ideal for combat dogfighting with your flying buddies.

Easy and fast to assemble, it is cheap to build yet will provide hours of fun, very easy to repair if you do get pretty badly shot up, some cyano and kicker will be all it takes to get you back out on the next sortie!

Performance with the reccomended power train will be plenty for those classic fighter maneuvers as you try and get on the "six" of your next victim! This 109 looks so good that even if you don't fly combat, it will provide hours of low cost enjoyment, but let's be honest, shooting down the "enemy" is just so much fun!

Specs:
Wingspan: 880mm
Length: 790mm
Flying Weight: 320g~370g

Includes:
Colour Instruction Manual
Hardware

Requires:
Your own 4 Channel TX/RX
15A~20A ESC w/BEC
HK2818 1350kv or HK2824 1300kv Brushless Outrunner Motor
8x4 Prop
9g Servo x 3
600mAh~1000mAh 3s Lipoly Battery

Product
Specifications

Další informace

  • SKU:
    BF109-EPP-KIT
  • Brand:
    HobbyKing
  • Hmotnost ( g )
    996.00
  • Délka
    940.00
  • Width:
    65.00
  • Výška:
    270.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Watch out for moulding defects. Rudder / vertical fin doesn't always line up correctly with the fuselage and is spaced too far back
Quality
Value
Overall
Quality
Value
Overall
Received this plane in excellent condition. I was quite worried with the way the parcels are handled at the postal department, but to my surprise and joy, I receiver it intact.
The packing along with other items I had ordered was excellent.
Even the Bird is a beauty and absolute value for money. Shall look forward to more such birds in the same price range.
Thanks Hobbyking.
Quality
Value
Overall
Quality
Value
Overall
might want a more powerful servo for the aileron control and that servor should be mounted on the bottom of the wing in case it fails as mine did so you dont have to cut the wing off. i suppose i could leave it un glued



this plane though is indestructible as advertised, survived a beating, not a scale bir as you can tell
Quality
Value
Overall
Quality
Value
Overall
Uune bonne petite mousse, *quip*e d'un HK2818 et une 8040 GWS accus 1000mAh 3S, vous aurez un avion sain sans puissance excessive. Les valeurs de CG et d*battements sont bonnes.
Quality
Value
Overall
Quality
Value
Overall
This should be great for a bit of combat but there a re a couple of small issues.
First the aileron linkage, as designed it's stupid. i've used a standard horn, cut away a little foam and put the horns just 10-15mm or so out from the aileron inner edge, roll is more than good enough.
second is the flexi tail, it'd rather flex like a fish than move the elevator. i've sliced the hinge line a little to offer less resistance but i'll put a CF rod or two down the fuz soon.

then on to flying, the motor mount has no down or side thrust, hence it flies like a half dead fish.
i used a snapped servo arm end to put about 3mm on the top left mount point which has more or less fixed this.
At the moment i've got a 2822 1450kv motor and 800 3 cell, it's a little underpowered to be super agile and towing a streamer, the 2826 1400kv i also got might be a better match but torque roll is aready an issue.

in short, good little plane, needs adjusting to get the best from it, don't expect miracles
Quality
Value
Overall
Quality
Value
Overall
It's a great little model but the aileron linkage geometry was just stupid, and it stalled a digital servo. This was cured by using two servos (one for each aileron.
I used a motor which (actually) produces 200 Watts on a 3s, 1300Mah Lipo and 7x6 prop. This is adequate for some good vertical performance.
It has very stable flight characteristics, and the rudder is powerful enough for knife-edge loops.
Quality
Value
Overall
Quality
Value
Overall
I bought the HK version of this Techone ME109 a couple of weeks age. There is a lively thread about these on RCGroups under Foamy Combat. I installed a T-motor AS2208 8x6 SF and 20 amp BEC and 3S1.3 Nanotech Bats. I stiffened the wing with 2 pieces of .125 CF Tube 2 pieces because of the dihedral of the wing prevented me from using one long piece, Wish I had. I have at least 15 flights on the plane and it is a blast to fly... BUT today I flew into a bad radio interference area of our field in Mission Bay Park and all of a sudden it was out of control and a wing blew off in mid-air.

The wing had only a holed out piece of flight ply holding the two half's together and one side of the wood spar had no glue!

I thought I could put all the pieces back together but too much damage was done in the motor mount area.. it just be glue holding together more glue... Sad because this is a really cool plane to fly ... low and slow I can still hear the machine guns roaring.
Quality
Value
Overall
Quality
Value
Overall
Don't waste your money buying this plane. The setup instructions and flying setup are terrible! This plane is not physically flyable with the setup they recommend. When giving up elevator, the tail of the airplane flexes to the right effectively giving right rudder! The tail is not stiff enough. The ailerons are too large and cause the airplane to stall & nose in. With those large ailerons, you barely need any throw!. I would not put the aileron servo in the center of the plane but would use two ailerons, one in each wing. The center position causes the push rod angles to be extreme and puts a lot of stress on the servo. also, the ailerons are very stiff and don't move very easily. The push rods provided are also too thin because they flex under loads. That caused the last crash of this airplane when I flew in moderate to high winds. The nose needs beefed up a little because it too flexes. I have crashed this plane more than I have flown and no I am not a beginner. I have flow for many years and have lots of gas/glow large airplanes. The advertisement says this plane is almost indestructible ... however, the fuselage split in half with my first nose in due to the aileron stall / snap roll into the ground! It is tough but still breaks just like all the rest. This was my first EPP airplane and I won't buy another.
Quality
Value
Overall
Quality
Value
Overall
Flew it the first time yesterday. I'm impress. I was not thinking it would go so well.
I commented my experience on : http://www.rcgroups.com/forums/showthread.php?t=1954577#post29302308

the setup propoe by hobbyking (biggest speed controller and motor proposed) is OK but I would recommend to use a 1300 maH battery and at least a 8x6 prop. On 8x4 it's just OK for park flying without any accro.

anyway, I love it
Quality
Value
Overall
Quality
Value
Overall
Had mine for a month or two now (actually bought one for my old man at the same time). Running a turnigy 2822 1450KV, 25A Plush ESC and 1000Mha Nanotech.

Be prepared to do a fair few modifications if you want it to fly well, the instructions are a bit ... poor. Using a single servo for the ailerons is horrid, especially with the very stiff hinges. I ended up just using two ailerons under the wings then using some cable ties glued tight to the wing to protect them. The elevator hinge was crazy stiff, I ended up having to run a blade across it to loosen it up as it was making the whole tail section wag when operating! I also had to glue in a couple of carbon fibre rods on either side of the tail section to stiffen it up and stop it from wagging so much. The wings are waaaaaay to flexible, it comes with a carbon fiber wing spar, but it's not enough, any sort of high G and it wants to fold up (you have to be very careful). Thinking of putting in some carbon strips to stiffen up the wings. Also, make sure you put a washer in when installing the motor to give you some right-thrust, made it fly so much better then install the motor straight. After all that, it actually flies really well, one of my favorites at the moment, although it's only a matter of time before I fold the wings up.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').