This stunning looking MXS-R is a pure, mean, 3D machine! The superb Ultra-light construction, which features a sheeted spine fuselage for strength, keeps the flying weight minimal, couple this with a 30cc engine and you have unlimited vertical performance!
The wings and horizontal stabilizers are plug in for easy transport, the tailfeathers are not flat sheet but full aerofoil, the control surfaces are easily large enough for 3D maneouvers. Rudder is pull/pull and high quality ball linked control rods are used throughout for precision and safety.
The pre-applied covering is glossy and of a very high standard, the superb colour scheme which is plain red on the underside, is ideal for orientation, especially once the included decal sheet has been applied. This is a high quality 3D model that is also an ideal everyday sport flyer when set up on low rates, either way, it's a real performer and a real looker!
Flying Weight: 4080g~4540g
Engine: 26cc (sport) ~ 30cc (3D) Gas Engine (not included)
Your Own 6 Channel TX/RX
6 x MG High Torque Digital Std size Servo
26cc~30cc Gas Engine
Lipoly RX Battery
Kapacita ( mAh )
Hmotnost ( g )
J U N K J U N K J U N K J U N K J U N K J U N K J U N K J U N K rubbish rubbish rubbish rubbish kitnao gostei muitas pecas vieram faltando kit muito mau construido com cola branca que crianca usa no colegio , cowl quebrado , nao tem manual!!! ninguem sabe onde * o cg . estou muito chateado com o mesmo ira voar mais terei muito tempo gasto para reformar fora o tempo que terei que gastar e dinheiro para repor tudo que veio faltando!!! os horns nao sao dourados sao prateados nao vem com nenhuma borracha para fixar os parafusos do cowl!!!
There is no manual with this plane but is you have ever build an ARF of this type that is no big deal. The build it straight forward and very easy. I installed an NGH GT25 for power and it fit very well. The engine is spinning a Turnigy 17x8 wide blade at 7700RPM so I think I will have enough power. I had to add 6oz of weight to the nose to get the CG just in front of the wing tube. Looking forward for the weather to clear to do the maiden flight. I have a review on RC Universe. Here is the link. http://www.rcuniverse.com/forum/gas-engines-142/11615724-ngh-gt25b-hobby-king-mxs-r.htmlReceived my rxs today ,well packaged with a second box, the quality looks great ,all parts fit together great even the lines on the cowl line up with lines on air frame ,very impressed with the kit just ordered engine and servos for it from hobby king hope they are as good as the rxs kit .Gripes, tail wheel not so great, main wheels a bit small for this model,no manual for construction. Good points great packaging,lovely kit with all bits needed for assembly ,price great for what u get,shipping from Nederlands to Ireland $14 that can not be beat, all in all very happy so far,,,,Not a bad plane but not suitable for a 30cc engine. Hobby King claim the fuse to be 1793 mm, this is not so. Fuse lenght is nearly 300 mm shorter than claimed. so, if you got a 30cc engine this is not the plane for you. Included hardware seems to be a joke and is not suited for a plane this seize.A very good looking plane, the build quality and covering is excellent. The canister tunnel is an excellent feature, very minimal cutting of the cowl was needed to fit the head and spark plug of a dle 20, hard ware supplied is good quality but I wanted to ad a bit extra with a new improved setup but only a small cost from HK. Nearly had its maiden flight today but the light cross wind at the field un-nerved me, I'm still a bit new at this. The 20cc will not be 3D power but running up today it seems to have plenty of thrust. I will a post on discussion page with progress. happy flying. m. flyI have no nose weight the RCG 30 balances the plane fine.
Standing on a bathroom scale my plane weighs right at 13 pounds.
ha j'ai oubli pas de notice !!je m'en fout en partie mais au moins donner la position du CENTRAGE c'est quand mme important !!Habe keine Bauanleitung bekommen, also keine Schwerpunktangabe
(hat jemand eine?)
Motorhaube und Kabienenhaube knnten besser passen.
Alu Ruder und 2mm Schubstangen passen nicht zum
Modell der 30cc Klasse (sollten schon 3mm sein)
Folie Top keine Blasen oder Falten.
Ansonsten ein Gutes Modell fr den Preisyou can see the plane flying here
I find, its build very well, but a bit heavy, therefor overall 4 crowns.
With my configuration - 9S 4.000 mAh - C 6364 250 kv - APC 21x13,5
it flys very well and fast, not easy and perfect for 3d, but very good for normal acro and easy 3d (a bit to heavy and not enough power i think - see vid). Very sensibel over elevator - much deflection caused stall.
7-8 min flying time easily possible.