Hobbyking OSD System Combo: Main Board, Power Module, USB/GPS/IR/TEMP Modules w/Remote
The HobbyKing OSD Combo is a quick and easy way to add a wealth of on screen information to your FPV system. With GPS coordinates, airspeed, voltmeter, temperature, and many more display functions this OSD unit will make a great addition to any FPV setup at a fraction of the cost of other GPS OSD systems currently available. It even includes an IR sensor and remote control for wireless function control.
An excellent new feature of this system is the "home direction" indicator which works as follows:
"If more than 10KM/H or equivalent in MPH speed is measured by the GPS for not less
than half of a second, the system will switch the operating mode from “Landed” mode to
“Taken-Off” mode. The system will always compare between the current position
coordinate and the position measured in “Landed” mode, and calculate the “Home
Direction”, hence advises the pilot where the plane took off referencing to the current flying
heading. If you are lost during the flight, you may always fly back to the take-off
location by the referencing of home direction arrow."
OSD Display Features:
Power battery voltage
Power battery gauge
Power battery current
Power battery consumed energy
Main Sea Level Altitude
Maximum altitude reached
Distance to home
Auxiliary voltage status
Flight recorder status
Weights: Main board - 17g / Power module - 23g / USB Module - 10g / GPS Module - 14g
Dimensions: Main board - 60x18x34mm / Power module - 57x13x31mm / USB Module - 45x9x16mm / GPS Module - 30x9x17mm
***** Note: Firmware updates are available under the files tab. Check back regualry for the latest updates.
Hmotnost ( g )
Ottimo prodotto, peccato che prima di trovare i file manuali e driver per capire come collegarla ne ho bruciata una... adesso ho uplodato file manuale e driver usb...
hobbyking dovrebbe rilasciarmi un buono sconto.ne ho bruciata una subito... non c' segnato la polarit del connettore. c' solo una scritta: -in. e -out dall'altra parte. ho pensato che fosse il negativo... ha fatto una fiammata appena ho collegato la batteria. ovviamente non ci sono istruzioni su come collegare il tutto e i lsito del produttore pare in disuso. non ci sono istruzioni ne download del driver. magari un ottimo prodotto se riesco a farlo funzionare.Very good to FPV. And I like the image quality!This OSD is a great starter unit for the money, and gives plenty of on screen info for the user. It does take a while to get a good satellite lock and give Longitude and Latitude co - ordinates which are needed for the RTH arrow to work, but the big problem on my unit was the updating of the display, it was completely out of sync with control input from the Tx by about a half second. This is OK for a ground station monitor but not for FPV as you are completely disorientated from the plane and you will crash!A great value display with loads of features, this is my first entry into using an OSD so I had to over come not knowing how to make it all work!. At first i thought i had a faulty system as it was taking a long time to get a good GPS lock ( 12 minutes ) . It turned to be not enough power from my Lipo's!, now I use separate power for the OSD and the 5.8 Ghz video TX and have GPS lock in under 5 min, the Temp sensor always reads in Centigrade but the measurement units change from Metric to Imperial (test by checking Altitude reading) now very happy with how it all worksA great value display system, it does everything it says it will do. The return to home pointer and temperature displayed clearly, along with all the scales and datum horizon. the only slight downside I have found is it can take some time to get a good satellite locks before it will show latitude and longitude co-ordinates. this is required before you take - off!!! to have the RTH pointer display on screen. once these are displayed the clock,date, and flight time are all updated on screen and your ready to gowhat a great value display unit. it does everything it says it will do, the only slight downside I have found is the time it takes to get a good GPS lock sometimes over a minute if there is heavy rainclouds. and I have not yet been able to achieve a lock while testing indoors but as I don't fly inside its not a problem !. All working fine with return to home pointer, and temp sensor displayed clearly. and updated the software with the OSD Tools application from the file sectionWell I am astounded. This has everything and I mean everything plus you could want in an OSD system. The ability to alter many of the functions and reset the system with an infra red remote is a definite bonus. Installation is simple and 'by the book' just do what it says and it works straight out of the box. Information shown in the display is accurate (being compared against the DJI Naza system and Spektrum GPS running in parallel) A big advantage of this system is that it is a module which means it can quickly be transferred between craft. One thing that would have been nice would be the ability to change the display from white to black when needed but that is being very 'picky'. An excellent buy especially considering the price, highly recommended!Hi there,
This product is not good for high current vehicles.
Melted the solders and Cause my S800evo to crash with zenmuse on.
definetely a hobby item if you use.Great performance for the price !! Easy to install and performed flawlessly and the tracking system is very handy when you are not certain of your location. A must when you consider the security factor!
Apache OSD Tools V1.024 download now [242kb] OSD Manual download now [1705kb] Manual download now [1705kb] Driver USB PL2303 download now [4369kb] OSD Manual Fr download now [1413kb] TF card Reader ! download now [979kb]