Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat

Hobbyking S4016D Coreless Digital Titanium Gear Servo (HV) 56g / 0.12s / 17.5kg

Hobbyking S4016D Coreless Digital Titanium Gear Servo (HV) 56g / 0.12s / 17.5kg

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Váha:
135 g
SKU:
S4016DX
Popis
produktu

S4016D Coreless Digital Titanium Gear Servo, high voltage 6v~7.2v with alloy heatsink casing.

Specifications:
Weight: 56g
Direction: Clockwise/pulse travelling 1000~2000us
Dimensions: 40.2 x 20.1 x 38.8mm
Operating Voltage: 6v~7.2v
Torque: 15.5kg/cm @ 6v, 17.5kg/cm @ 7.2v
Speed (sec/60 deg): 0.14 @ 6v, 0.12 @ 7.2v
Motor Type: Coreless
Middle Case: Aluminium Heat Sink
Lead/Plug: JR Type
Dual Ball Bearing
Titanium Alloy Gear

Product
Specifications

Další informace

  • SKU:
    S4016DX
  • Brand:
    nedefinováno
  • Hmotnost ( g )
    135.00
  • Délka
    84.00
  • Width:
    38.00
  • Výška:
    58.00
  • Rychlost ( Sec / 60deg )
    0.12
  • Točivý moment ( kg) (min . 0,01 kg )
    17.50
  • Unit Weight (g):
    56
  • A ( mm ):
    44.00
  • B ( mm )
    40.00
  • C ( mm )
    40.00
  • D ( mm ):
    20.00
  • E ( mm ):
    54.00
  • F ( mm )
    27.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The following was found on the xq power site (manufacturer of this servo)



"The lastest customers please pay attention:For the brand XQ-POWER XQ-S40**D series 3 models XQ-S4013DXQ-S4016DXQ-S4020D have been Comprehensively optimized. For the convenience of using them under the normal voltage, our company readjust the original voltage range 6.0~7.2V to 4.8~6.0V. So now these 3 models Servos can work normally under the voltage range 4.8~6.0V. The speed has also been upped and the torque is constant. To bring customers the convinence, please fogive us."



which indicates that this is not a HV servo allthough it's specified

as a 6 to 7.2 V







verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After two flights the servant began to rotate on its axis as it had crushed the gear, I do not recommend. you will suffer in purchasing
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The servo looks good, inside and outside, printed circuit nicely fixed with silicon rubber and so are the wires.

It is not a HV servo and that's bad because I bought it for that purpose, the XQ company doesn't file it under HV and it's specs are at 4.8 and 6V.

On 6V even under little stress it starts moving around it's position. Both specimens I bought do this. It centers well and it's resolution seems to be ok too.

HK please look in to this and remove the HV spec, other people might step in this trap too.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').