New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

HobbyKing XP 3A 1S 0.7g Brushless Speed Controller

HobbyKing XP 3A 1S 0.7g Brushless Speed Controller

Shipped From:
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

8,83 €
Stav:
Skladem
Váha:
15 g
SKU:
HK-XP3A
WANT FREE SHIPPING? Click here to find out more!
HobbyKing XP 3A 1S 0.7g Brushless Speed Controller 
The HK 3A is a tiny (around 0.7gram) brushless speed controller built only for single cell applications and for current draw up to a maximum of 4A bursts.
This brushless esc is only to be used for Lipoly single cell applications where no more than 3A constant is needed.

Features.
High speed, Multifunctional MCU. 
Full protection features Low voltage, Over-heat, Signal lost failsafe, Safe power On protection.
Smooth startup.
Linear Throttle
Supports 240,000RPM (2 poles) / 40,000RPM(12 poles)
Programable by transmitter

Spec.
Cont. Current: 3A
Burst Current: 4A
Max Voltage: 4.2v
BEC: Not required. power supplied directly from 1S battery.
Programable: Yes
Weight: 0.7g
Dimensions: 11x13x8mm
 
Note*
Please be careful when using this product. Due to its size and delicate nature it is easy to overload this ESC. Only use single cell Lithium Polymer batteries and never draw more than 3Amps or never more than 4A for more than 10 seconds.
  • SKU HK-XP3A
  • Brand HobbyKing
  • Kapacita ( mAh ) -
  • Hmotnost ( g ) 15.00
  • Délka 80.00
  • Width 2.00
  • Výška 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Gut fr leichte Depron Hallenflieger

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gut fr leichte Depron Hallenflieger

Very good esc, this is the best 3amp esc out there, very fragile though so be careful! this esc's fets are fragile too, but for its size, its expected so don't push it more than its limits. but compared to other 3amp esc, this is the best so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good esc, this is the best 3amp esc out there, very fragile though so be careful! this esc's fets are fragile too, but for its size, its expected so don't push it more than its limits. but compared to other 3amp esc, this is the best so far.

I have bought four of these units. One of them works. I am using the ar6400 brick. I followed the instructions, and there is nothing wrong with my wiring. my receiver is in brushless mode. Pretty sad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bought four of these units. One of them works. I am using the ar6400 brick. I followed the instructions, and there is nothing wrong with my wiring. my receiver is in brushless mode. Pretty sad.

lger et idale pour gagner du poids sur vos micro indoor ....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

lger et idale pour gagner du poids sur vos micro indoor ....

super nur mann muss es flashen fr mcpx

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

super nur mann muss es flashen fr mcpx

Excellent ESC, very fast. I use it for the tail motor of my mcp-x and for the main motor of my nano-cp x, after reflashing it with BlHeli code (tail / main).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent ESC, very fast. I use it for the tail motor of my mcp-x and for the main motor of my nano-cp x, after reflashing it with BlHeli code (tail / main).

Best tail esc for mcpx dual brushless ... Flash the blbeli firmware ... Best tail peformance better as the DP-3 with the c05s tailmotor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Best tail esc for mcpx dual brushless ... Flash the blbeli firmware ... Best tail peformance better as the DP-3 with the c05s tailmotor

Perfect little ESC - cheaper than anywhere else.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect little ESC - cheaper than anywhere else.

hola necesito ayuda para conectar este esc al ar6400 al parecer no logro programarlo por que cuando lo conecto hace beep como si no le llegara seal de acelerador ya intente desconectando el esc y esperando unos segundos y despues conectarlo y tengo los mismos resultados alguien sabe que devo hacer

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hola necesito ayuda para conectar este esc al ar6400 al parecer no logro programarlo por que cuando lo conecto hace beep como si no le llegara seal de acelerador ya intente desconectando el esc y esperando unos segundos y despues conectarlo y tengo los mismos resultados alguien sabe que devo hacer

HELP

How do i program these escs using and turnigy 9x with the frsky module and a D8R II plus rx?

Do I need to be in PCM mode, do I need to attach motor to esc?

Saludos,

Jose

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

HELP

How do i program these escs using and turnigy 9x with the frsky module and a D8R II plus rx?

Do I need to be in PCM mode, do I need to attach motor to esc?

Saludos,

Jose

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
HK-XP3A User's Manual Download [202]
how to flash it Download [139]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!