New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Hobbyking® Smart 5V BEC LiPo 250mAh (1pc)

Hobbyking® Smart 5V BEC LiPo 250mAh (1pc)

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000453-0
WANT FREE SHIPPING? Click here to find out more!

The HobbyKing Smart BEC with built in LiPo is an excellent lightweight and compact solution for gliders and discus launch gliders and can also be used as a receiver pack to power smaller models with micro servos. The Smart LiPo has an integrated 1 cell (3.7v) LiPo and a high frequency, high performance voltage booster / regulator which increases the output voltage to 5v and also allows you to charge directly from another battery (6-16.8v max)

Another excellent design feature of the Smart LiPo is the built-in low voltage indicator which flashes when the voltage is reduced below 3.5v. Low voltage protection cut off is pre-set at 3.v to prevent over discharging of the battery.

Features:
• Lightweight and compact
• Integrated 3.7v LiPo with high frequency voltage booster
• Built-in Voltage regulator
• Can be charged directly from another battery (6-16.8v)
• Low voltage indicator
• Low voltage protection

Specs:
Capacity: 250mAh
Size: 39 x 21 x 14mm
Weight: 11.2g
Input Voltage: 6-16.8v
Output Voltage: 5v Stabilized
Maximum Output Current: 1 Amp
Switch: External Jumper

  • SKU 9171000453-0
  • Brand HobbyKing
  • Kapacita ( mAh ) 0.00
  • Hmotnost 16.0000
  • Délka 60.00
  • Packaging Width 20.00
  • Výška 45.00
  • HK 5v Smart Lipo
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought 2 250mah and both of them only charge up to 180mah.
Once it starts flashing, be sure to land imediatelly because it will go off in less than 3 minutes.
Remember always to unplug the cable that connects the battery to the circuit board. It drains charge even when it is off with the jumper.
If you turn it on and off a couple of times, it will hang and the only way to make it work agan is to unplug and plug the battery again to the board.
In resume, I wouldn't trust this on any expensive DLG.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 2 250mah and both of them only charge up to 180mah.
Once it starts flashing, be sure to land imediatelly because it will go off in less than 3 minutes.
Remember always to unplug the cable that connects the battery to the circuit board. It drains charge even when it is off with the jumper.
If you turn it on and off a couple of times, it will hang and the only way to make it work agan is to unplug and plug the battery again to the board.
In resume, I wouldn't trust this on any expensive DLG.

great price to performance ratio, i have only managed 3 flights of around 45mins each with power left over in my full size dlg running 4 channels.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great price to performance ratio, i have only managed 3 flights of around 45mins each with power left over in my full size dlg running 4 channels.

If you have a 2 channel, lightweight DLG, these are perfect for powering your servos, I get at least an hours flight on my Mini Dlg with two aileron and an elevator servo, the CoG is nearly perfect with no extra weight needed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If you have a 2 channel, lightweight DLG, these are perfect for powering your servos, I get at least an hours flight on my Mini Dlg with two aileron and an elevator servo, the CoG is nearly perfect with no extra weight needed.

Very handy product. buy the 500mah version

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very handy product. buy the 500mah version

Nice lightweight receiver battery. Work great in my self build DLG.

DO NOT FORGET to connect the loose wire (with white connector) to the battery. Otherwise it will not give power.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice lightweight receiver battery. Work great in my self build DLG.

DO NOT FORGET to connect the loose wire (with white connector) to the battery. Otherwise it will not give power.

Just arrived. Works as advertised, great value for money. Doesn't have a buzzer like ShredRC's battery, just LED's.
The only thing I don't like is that it can give only 1A output, so bigger gliders - beware :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just arrived. Works as advertised, great value for money. Doesn't have a buzzer like ShredRC's battery, just LED's.
The only thing I don't like is that it can give only 1A output, so bigger gliders - beware :)

Customer files
charging_setup Download [307]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!