New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

HobbyKing® ™ 35A Sensored/Sensorless Car ESC (1:10/1:12)

HobbyKing® ™ 35A Sensored/Sensorless Car ESC (1:10/1:12)

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

21,71 €
Stav:
Skladem
SKU:
HK-SENS-35A
WANT FREE SHIPPING? Click here to find out more!

HobbyKing® ™ 35A Sensored/Sensorless Car ESC (1:10) with built in cooling fan.

Features:
Enhanced throttle response, excellent acceleration, enhanced braking and throttle linearity
Programmable with a HKSS programming card.
Automatically detects the number of cells within the battery pack.
Multiple protection features, Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor jammed protection
Compatible with HobbyKing® ™, NOVAK, LRP and ORION Sensored brushless motor

Specification:
Cont./Burst Current: 35A/190A
Resistance: 0.0015 ohm
Suitable Car: 1/10 & 1/12 on-road and off-road cars / trucks
Suitable Brushless Motor: 13.5T On road / Off road
Battery: 5-9 cells Ni-xx (NiMH / NiCd) 2-3 cells Li-Po
BEC Output: 6V/2A of switch mode built-in BEC
Motor Type: Sensorless and Sensored brushless motor
Dimension:  27x31x34mm
Weight: 50g

  • SKU HK-SENS-35A
  • Brand HobbyKing
  • Kapacita ( mAh ) -
  • Hmotnost 138.0000
  • Délka 140.00
  • Width 53.00
  • Výška 65.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very good value with the HKKS programer. Hobbyking has been out of stock on the programer, but 11.00 at amazon. While waiting on program card, I had to run an outrunner and a inrunner on it without the sensor to reverse motors due to wierd transmission. Anyway, sensorless starts better than most, and once I got the card, I was able to reverse rotation in software, making the sensor usable on a reverse plumbed motor. Very good value .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good value with the HKKS programer. Hobbyking has been out of stock on the programer, but 11.00 at amazon. While waiting on program card, I had to run an outrunner and a inrunner on it without the sensor to reverse motors due to wierd transmission. Anyway, sensorless starts better than most, and once I got the card, I was able to reverse rotation in software, making the sensor usable on a reverse plumbed motor. Very good value .

Amazing ESC, really compact, easy to set-up with the card and soo smooth with the sensored cable, im using one on my MF-01X with a Novak 17,5T and works smooth as hell, the other on my Defender 110 and the drag brake is strong enought to hold the 5Kilos of car in the rought hills

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Amazing ESC, really compact, easy to set-up with the card and soo smooth with the sensored cable, im using one on my MF-01X with a Novak 17,5T and works smooth as hell, the other on my Defender 110 and the drag brake is strong enought to hold the 5Kilos of car in the rought hills

Pretty nice esc. Running it on 3s with the fan unplugged. Having no issues, very impressed. Gonna buy more as needed. Does not come with bullets for the motor leads. Besides that great price, great product!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty nice esc. Running it on 3s with the fan unplugged. Having no issues, very impressed. Gonna buy more as needed. Does not come with bullets for the motor leads. Besides that great price, great product!!

Nicely constructed esc with a very small footprint. I plan on using it in a 1/10 pan car with a Trackstar 17.5.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nicely constructed esc with a very small footprint. I plan on using it in a 1/10 pan car with a Trackstar 17.5.

Awesome esc! I have it installed in my drift car with a 17.5t duratrax motor. I also ordered a HKSS program card with this esc. I have the timing, brake, and acceleration all maxed out and this little esc gets the job done. My motor is geared 33/84 in a counter steered drift car and the motor has always been cool enough to touch with your finger. I am running it sensored and it is nice and smooth at low throttle. I am going to try this esc and a 21.5t motor in my scx10 as a crawler setup. I would definitely recommend HK esc's to a friend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome esc! I have it installed in my drift car with a 17.5t duratrax motor. I also ordered a HKSS program card with this esc. I have the timing, brake, and acceleration all maxed out and this little esc gets the job done. My motor is geared 33/84 in a counter steered drift car and the motor has always been cool enough to touch with your finger. I am running it sensored and it is nice and smooth at low throttle. I am going to try this esc and a 21.5t motor in my scx10 as a crawler setup. I would definitely recommend HK esc's to a friend.

I'm running this in an RC10T with a 3200kv turnigy motor, and no fan. Neither gets warm, and I've gotten downright reckless with the gearing. Can't say enough about these esc's, the adjustments are really helpful with the program card. I like that you can adjust throttle percent; I went to 70pcnt after switching to LiPO and adjusted the punch as well. Lately I've had to recalibrate the unit upon start up once or twice, but otherwise trouble free.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm running this in an RC10T with a 3200kv turnigy motor, and no fan. Neither gets warm, and I've gotten downright reckless with the gearing. Can't say enough about these esc's, the adjustments are really helpful with the program card. I like that you can adjust throttle percent; I went to 70pcnt after switching to LiPO and adjusted the punch as well. Lately I've had to recalibrate the unit upon start up once or twice, but otherwise trouble free.

Very good ESC, use the HKss to program and it's already set to the manual. Easy to bind after installation. just need two sided tape to install.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good ESC, use the HKss to program and it's already set to the manual. Easy to bind after installation. just need two sided tape to install.

I use this ESC in my 1/16 Racing Buggy. It is working perfect with 2S and 3S and i have no problems since i bought it one year ago.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this ESC in my 1/16 Racing Buggy. It is working perfect with 2S and 3S and i have no problems since i bought it one year ago.

I have been running this esc for over two years in my B4.2 buggy with a 17.5 motor. It has very smooth throttle for stock class. Always runs very cool even without fan, which is good for buggies. You really can't beat it for the price. I don't even bother running expensive esc's anymore since I'm am so pleased with the Hobbking line of speed controls. I really like being able to use the HKSS program card at the track to make any adjustments if needed. Makes it so easy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have been running this esc for over two years in my B4.2 buggy with a 17.5 motor. It has very smooth throttle for stock class. Always runs very cool even without fan, which is good for buggies. You really can't beat it for the price. I don't even bother running expensive esc's anymore since I'm am so pleased with the Hobbking line of speed controls. I really like being able to use the HKSS program card at the track to make any adjustments if needed. Makes it so easy.

I must say that this little esc is well made and incredible smooth on start up the speed is nice and fast handles a 3900kv track star without a problem and fits right under the shell of a arrma granite. The only thing I am taking a star away is there was no reference of needing a program card under the item list to get into the menu if I knew that I would have purchased a turnigy esc with program built in but anyway it still a really nice esc for the money and I wanted it for the throttle limiter so my son can drive it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I must say that this little esc is well made and incredible smooth on start up the speed is nice and fast handles a 3900kv track star without a problem and fits right under the shell of a arrma granite. The only thing I am taking a star away is there was no reference of needing a program card under the item list to get into the menu if I knew that I would have purchased a turnigy esc with program built in but anyway it still a really nice esc for the money and I wanted it for the throttle limiter so my son can drive it.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
sensotr conector... Download [507]
No File Name Download [1]
manual Download [564]
No File Name Download [564]
Series Spec Sheet Download [163]
Programmable items Download [174]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save