New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

HobbyKing® ™ Condor EP Balsa Glider 1240mm (ARF)

HobbyKing® ™ Condor EP Balsa Glider 1240mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9110000005
WANT FREE SHIPPING? Click here to find out more!

Looking for a small, classic style balsa glider for stress-free Sunday flying? The Condor EP fits the bill.

The HobbyKing® ™ Condor EP glider is a nicely finished and mostly pre-assembled 4CH balsa glider kit. Featuring a pre-built fuselage, easy to install pre-slotted tail section and two-piece bolt on wing, very little is left to complete this model and get it into the air! Pre-installed pushrod guide tubes make installing the servos and setting up the control surfaces a breeze. With its straight wing design this model offers a bit more aerobatic capability than a standard dihedral wing glider, yet still provides stable flight characteristics. The Condor will be sure to provide you with hours of thermal soaring fun!

This model comes in almost ready to fly form, which means you will need to add your own brushless motor/ESC, servos, radio system and battery. Please see related items below.

Features:
• Compact size
• Pre-built fuselage
• Two-piece bolt-on wing design
• Easy to install pre-slotted tail section
• Pre-installed pushrod guide tubes
• Straight wing design allowing for glider aerobatics

Specs:
Wingspan: 1240mm
Wing area: 21.7sq.dm
Length 835mm
Flying Weight: 670g

Required:
4 x 5~9g Servos
22~28mm Brushless Motor
15~25A Brushless ESC
3S 1000~1800mAh Lipoly
7x3.5~8x4 Propeller
Your own 4CH Transmitter and Receiver

  • SKU 9110000005
  • Brand HobbyKing
  • Kapacita ( mAh ) -
  • Hmotnost 1509.0000
  • Délka 795.00
  • Packaging Width 210.00
  • Výška 255.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Overlander Tornado thumper 2826 /09 1900kv
Overlander 20A ESC
Alloy Spinner 3.2mm shaft
8 x 4.5 Propeller.
Turnigy 1800mah 3s 20c
New Power XL-9.0gram servos x 4.

Weight 1lbs 3 ozs

Static test produced 21.4 amp draw

In flight amp draw will be reduced so this proves to be a good balance.

G of G 50mm back from leading edge as stated. (on front edge of main spar)
Slight reinforcement to engine mount and brace on fuselage at front of wing.
Thin ply sheet used to reinforce wing bolt fixings too.
The cowl is a tricky fit so I did without it. (no big deal here).
Keep everything as far forward as possible.
I used an alloy spinner just for a little more weight up front.

Model performs wonderfully with predictable hand launch.
Nice vertical speed with very nice big loops. Gentle long landings.
Flight time is endless on the 1800mah batteries. Quite a nice glide too. The flat wing is an advantage.

All in all with this setup the model is a delight.

Build goes together in no time, the reinforcements are essential.
The whole thing fit a any car with the wings attached.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overlander Tornado thumper 2826 /09 1900kv
Overlander 20A ESC
Alloy Spinner 3.2mm shaft
8 x 4.5 Propeller.
Turnigy 1800mah 3s 20c
New Power XL-9.0gram servos x 4.

Weight 1lbs 3 ozs

Static test produced 21.4 amp draw

In flight amp draw will be reduced so this proves to be a good balance.

G of G 50mm back from leading edge as stated. (on front edge of main spar)
Slight reinforcement to engine mount and brace on fuselage at front of wing.
Thin ply sheet used to reinforce wing bolt fixings too.
The cowl is a tricky fit so I did without it. (no big deal here).
Keep everything as far forward as possible.
I used an alloy spinner just for a little more weight up front.

Model performs wonderfully with predictable hand launch.
Nice vertical speed with very nice big loops. Gentle long landings.
Flight time is endless on the 1800mah batteries. Quite a nice glide too. The flat wing is an advantage.

All in all with this setup the model is a delight.

Build goes together in no time, the reinforcements are essential.
The whole thing fit a any car with the wings attached.

Tried to write review but didn't post? Trying again. Turnigy Aerodrive 2209/26 1130kv, 1000mah, 18A ESC, Pelikan aluminum "flow through" spinner with Aeronaut CAM 9x5 folding prop. 510 grams total weight. Keep everything as far forward as possible. As set up the plane is AMAZING! Flies like it's on rails. Disappointed with quality in the cowling and hatch area. I had to peel back the covering and extensively sand the fuselage so the cowling would fit. Cowling finish was terrible. I also replaced the plastic sheet hatch with fiberglass over balsa sheet. More work than I wanted but it was worth it. Great value. Posted "file" pictures.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tried to write review but didn't post? Trying again. Turnigy Aerodrive 2209/26 1130kv, 1000mah, 18A ESC, Pelikan aluminum "flow through" spinner with Aeronaut CAM 9x5 folding prop. 510 grams total weight. Keep everything as far forward as possible. As set up the plane is AMAZING! Flies like it's on rails. Disappointed with quality in the cowling and hatch area. I had to peel back the covering and extensively sand the fuselage so the cowling would fit. Cowling finish was terrible. I also replaced the plastic sheet hatch with fiberglass over balsa sheet. More work than I wanted but it was worth it. Great value. Posted "file" pictures.

Posted review earlier. Rating "crowns" were not selected. Please update to this reflect selection. Thank you.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Posted review earlier. Rating "crowns" were not selected. Please update to this reflect selection. Thank you.

While it looked good in the box I soon found the fuse to be a little twisted. the bblind nuts for the wing bolts were the wrong size which meant I had to break the bracket off and make a new one with new dubro blind nuts and bolts. If you have no experience building balsa models don't buy it.....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

While it looked good in the box I soon found the fuse to be a little twisted. the bblind nuts for the wing bolts were the wrong size which meant I had to break the bracket off and make a new one with new dubro blind nuts and bolts. If you have no experience building balsa models don't buy it.....

Plane will barely balance with a 2250 3s 65c nano. Very tail heavy. Flys decent slow roll rate with a lot of throw.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plane will barely balance with a 2250 3s 65c nano. Very tail heavy. Flys decent slow roll rate with a lot of throw.

Feel a bit ripped as i just brought this plane as a platnium member only to find it advertised by hobbyking cheaper on ebay! dont buy this plane if you have no experience in balsa as instructions are poor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Feel a bit ripped as i just brought this plane as a platnium member only to find it advertised by hobbyking cheaper on ebay! dont buy this plane if you have no experience in balsa as instructions are poor

I love this plane!! I wouldn't recommend it with a 2205 if you're planning on flying a 1500 mAh battery though, it might be a bit too heavy (I can't say for sure though, I flew mine with a 2830 w/18A ESC and it flew GREAT). It can fly very smooth and the stall was very predictable, but even fully loaded and ready to fly it needed weight added to the nose to get the CG right. It came with a CD with the manual on it, which made putting it together easy. It rolls great and can handle inverted/aerobatics quite well!! It's one of those rare planes that will fly slow and aerobatics. The motor mount is a bit too weak to fly without the cowl (which wouldn't fit under the prop anyway) and I ended up breaking it on my second landing, otherwise it's a great plane and is GORGEOUS to look at!
<iframe width="560" height="315" src="http://www.youtube.com/embed/7BQZIG8n2KE" frameborder="0" allowfullscreen></iframe>

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love this plane!! I wouldn't recommend it with a 2205 if you're planning on flying a 1500 mAh battery though, it might be a bit too heavy (I can't say for sure though, I flew mine with a 2830 w/18A ESC and it flew GREAT). It can fly very smooth and the stall was very predictable, but even fully loaded and ready to fly it needed weight added to the nose to get the CG right. It came with a CD with the manual on it, which made putting it together easy. It rolls great and can handle inverted/aerobatics quite well!! It's one of those rare planes that will fly slow and aerobatics. The motor mount is a bit too weak to fly without the cowl (which wouldn't fit under the prop anyway) and I ended up breaking it on my second landing, otherwise it's a great plane and is GORGEOUS to look at!
<iframe width="560" height="315" src="http://www.youtube.com/embed/7BQZIG8n2KE" frameborder="0" allowfullscreen></iframe>

Customer files
No File Name Download [154]
Mods/Fiberglass hatch/Beefup/wing mount Download [115]
Mods/Fiberglass hatch/Beefup/wing mount Download [163]
Mods/Fiberglass hatch/Beefup/wing mount Download [151]
Mods/Fiberglass hatch/Beefup/wing mount Download [166]
No File Name Download [154]
No File Name Download [166]
No File Name Download [115]
No File Name Download [218]
Condor Manual Download [4649]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save