The Fidget Funfly is just as the name implies - Fun to Fly! The Fidget's interesting wing design makes it very stable and forgiving in flight, while giving it a unique look that you won't see on any other model at the flying field.
The Fidget can really take a beating thanks to its ultra durable carbon reinforced EPP foam construction. This is great for those unexpected "crash" landings. In most cases the Fidget will simply bounce off the ground and be ready to fly again straight away.
Most profile foamies are mid-wing aerobatic type which can be a real handful for less experienced pilots. The Fidget changes all of that with its flat bottom polyhedral wing design, making it very forgiving and easy to fly. However, the Fidget's large control surfaces allow for sport aerobatics by simply dialing up the control throws.
The Fidget is easy to build and includes all necessary hardware. Simply add your own brushless ESC, servos & radio system to complete the kit.
• Ultra tough EPP foam construction
• Unique polyhedral wing design
• Carbon fiber reinforced airframe
• Lightwieght design
• Easy to fly
• Brushless motor included
Flying Weight: 350~400g
Motor: 2208 1260KV brushless outrunner (included)
Propeller: GWS 8x4 (included)
Fidget Funfly Airplane
2208 1260KV brushless motor
Color User Manual
All Necessary Hardware
4CH transmitter and receiver
20~30A brushless ESC
4 x 8~10g servo
3S 11.1V 800~1000mAh lipoly battery
Hmotnost ( g )
Motorsize ( průměr -or- cc)
Rozpětí ( mm ):
SaleWeight ( g )
Rám / PNF / RTF (mm)
IC / 2 : Elec:
Kapacita ( mAh ):
Trs bonne qualit, bien fait ( attention querage stab ). Juste remis un peu de couleur pour mieux le voir en ext. Solide, vif, bien motoris. Trs content, il loge demeure ds la malle de la voiture, il vole partout.liked what i saw and received but flies like c...p, tryed changing c/g etc but i cant get this plane to fly nice. Get the EPP Yakbought this one because of how it looks : very cool
and i'm very disappointed about this one
Very very nippy plane very difficult to make fly even trying very different COG's from 2cm from the leading edge to the middle of the wing same results and i know how to assemble a plane i've got many.
My homemeade quickmade depron foamies of this size do fly much easyer even unbalanced.
I shouldn't have done this pushase and you sincerely shouldn't do too
i've got no problem at all with hobbyking sorry but i have to tell what this worth.une vrai russite ,un vol exterieur sans problme et intrieur aussi .
necessit de mettre du mixage aileron/direction si on veut tourner.A lot of fun for the dollars! It is a super cheap foam that splits easy. I did not use the prop saver, just an a adapter and a good prop. The plane fly's ok but if you ditch the landing gear [it will break up on the first less than perfect landing] then trim the end of the polyhedral wing tips level with the carbon reinforcements, she flies so much better! It turns sharper and is less inclined to be blown around by the wind. A great small paddock flier! I get 10 minutes easily out of a .800 3c battery. Use lots of rudder on turns. Lots of expo keep throws to a minimum.i got this plane for its unique design. Floght characteristic is oddly boring for me. can't do a roll because the ailerons are where flaps would be on a typical wing. maybe good for a beginner