Featuring a full fiberglass fuselage with built up ply and balsa construction, the HobbyKing® ™ FPV / UAV is set to raise the bar in FPV flight performance. The large motor mount area allows for a variety of motor sizes depending on your application. A slick fiberglass finish provides superior aerodynamics to foam planes while the rigid airframe offers a greater level of flight performance. The clear canopy is perfectly suited to FPV cameras or can be removed or modified with ease for a custom setup. The Fuselage boasts ample space for FPV equipment allowing a variety of custom setups and the flaps will ensure low speed landings with heavier payloads.
You will require a 35 to 42 size burshless outrunner, 5 x 9g servos (one for each control surface and one for the steerable nose wheel), a 40 to 60Amp ESC, 3s to 4s 2200mah~4400mah Lipo battery and your own transmitter and receiver (Tx/Rx). All the general hard ware (Push rods, screws, landing gear etc) are included to get this kit underway.
Some modeling experience will be required to complete this kit, However the finished product will be of a high quality with superior flight characteristics to foam and will last a life time.Features:• Purpose Built FPV/Aerial Camera Platform• Excellent Flight Characteristics & Stability at All Speeds• Durable Glassfiber Fuselage & Fully Sheeted Built Up Wing• 3pc Wing for Easy Transportation & Field Assembly• Robust Trike U/C with Steerable Nosewheel• Comprehensive Hardware Kit IncludedSpecs:
Wing Span: 1660mm
Motor Mount Diameter: 58mm
Distance From Center of Mount to Fuse: 114mm (max prop diameter 8"]
Dry Weight: 1300g
5 Channel (throttle, aileron, elevator, rudder/steering, flaps)
Required:Your Own TX/RX
Motor: 35 to 42 series Outrunner
ESC: 40a to 60A
Servo: 5 x 9g
Battery: 3s to 4s 2200mah~4400mahFPV Equipment
Hmotnost ( g )
Very poor plane, build was riddled with problems. auw is 3.5kg due to a very heavy tail. Front fuselage needed to be reinforced as was paper thing. tail cracks when lightly touched. Avoid! Buy the skywalker instead!!!Terrible plane don't waste 100 on this. You have to put SO much weight in the nose to balance it it makes it way too heavy flies horrible front wheel is useless. Wasted days on this hate the thing! The only nice bit was the 3 piece wing.its worst than it seems, cracked tail, and Hobby King is not ready to replace and says to send it back on your own expenses and than they will review and will suggest... Overall i am not happy with Hobby King.HK should improve its quality/upgrade if they are receiving regular orders of this model. I guess they are selling this model for the last 8 years. The one I receive have difference in Fuse Color which is light grey and wings color which is dark grey and it looks like a Joker...
HK should also introduce new fiberglass models.I am unhappy with the quality of this model... Noselanding gear is missing all the parts... Fuselage is cracked and the bags have been opened inside where the parts are missing... Also the shark pylon that i have ordered pnp is bad, very bad quality...