New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

H-King Fury 3D Aerobatic EPP Airplane w/Motor 800mm (ARF)

H-King Fury 3D Aerobatic EPP Airplane w/Motor 800mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9095000047-0
WANT FREE SHIPPING? Click here to find out more!

The Fury 3D is an EPP profile model with a whole lot of attitude and wickedly good looks. The paint scheme is not only good for orientation but also very nice to look at. This model is constructed of ultra durable EPP foam, making it virtually "unbreakable". This makes it the ultimate plane for practicing your 3D maneuvers with or for flying in small places.

The Fury is purpose built to handle all out 3D aerobatics. The wing is one-piece design and features carbon reinforcement right out to the wing tips. This makes it very rigid and capable of handling the most extreme aerobatics. The control surfaces are massive providing the type of control you need for extreme 3D flying. The fuselage is reinforced in similar fashion from the nose to the tail, providing flex-free flight! The rear servos are mounted right at the back making for very short runs of the control rods. This offers fast, accurate elevator and rudder response ideal for 3D flight. The metal pushrods feature a Z-bend in one end which attaches to glass fiber control horns while the other end is secured to the servo horn with the included EZconnectors.

Thanks to its clever design, assembly of the Fury 3D is a breeze. All hardware and a matched brushless outrunner motor is included, you will simply need add your own servos, ESC, radio system and batteries. If you're looking for an all-out 3D aerobat that is easy to build, ultra durable and cheap to outfit with electronics, the Fury 3D is for you!

Features:
• Ultra durable EPP foam construction
• High visibility paint scheme - great for orientation
• High performance brushless outrunner motor included
• Airfoiled wing featuring extensive carbon fiber reinforcement
• Massive control surfaces ideal for 3D flight
• Carbon reinforced fuselage for flex-free flight performance
• High quality glass fiber control horns
• Easy assembly

Specs:
Wingspan: 800mm
Fuselage Length: 955mm
Flying Weight: 350~400g

Included:
Fury 3D EPP airplane
2208 1260KV brushless motor
8x4 propeller
Assembly manual

Required:
4CH transmitter and receiver
15~20A brushless ESC
Micro/mini servo x 4
11.1V 3S 800~1000mAh lipoly battery

  • SKU 9095000047-0
  • Brand H-King
  • Kapacita ( mAh ) -
  • Hmotnost 1320.0000
  • Délka 950.00
  • Packaging Width 70.00
  • Výška 290.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I love this plane! It is extremely tough! It can really take a beating and does great aerobatics/3D. I would recommend this to anyone! Great price and great flyer! Thanks HK!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love this plane! It is extremely tough! It can really take a beating and does great aerobatics/3D. I would recommend this to anyone! Great price and great flyer! Thanks HK!

I flew the maiden today. I learned that the model will not take off using the wheels with the stock motor and prop. It zipped around really well on the ground like a car. Fortunately a hand launch was easy. I also learned the included pushrod connectors like to loosen in flight, so I replaced them with easy link connectors as they do not loosen up. I am going to try a nine inch prop next time. This is my first EPP plane of this type, so it was an easy build having worked with EPP kits before. I used 9 gram servos and a turnigy plush30 amp ESC and I am looking forward to learning 3D flight. This strikes me as great plane to start with.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I flew the maiden today. I learned that the model will not take off using the wheels with the stock motor and prop. It zipped around really well on the ground like a car. Fortunately a hand launch was easy. I also learned the included pushrod connectors like to loosen in flight, so I replaced them with easy link connectors as they do not loosen up. I am going to try a nine inch prop next time. This is my first EPP plane of this type, so it was an easy build having worked with EPP kits before. I used 9 gram servos and a turnigy plush30 amp ESC and I am looking forward to learning 3D flight. This strikes me as great plane to start with.

I think this a cool looking little epp 3d plane. Comes packaged very well. Goes together fairly quick. At this time I have over 50 flights on this plane with the stock motor and I'm using a 9-inch prop instead of an 8 inch prop. The only thing I'm not crazy about is the landing gear and how it is mounted to the plane.
Flys very well as long as it's not too windy. Hovers well and the roll rate is phenomenal.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I think this a cool looking little epp 3d plane. Comes packaged very well. Goes together fairly quick. At this time I have over 50 flights on this plane with the stock motor and I'm using a 9-inch prop instead of an 8 inch prop. The only thing I'm not crazy about is the landing gear and how it is mounted to the plane.
Flys very well as long as it's not too windy. Hovers well and the roll rate is phenomenal.

Man, what a lot of fun this EPP plane is, good quality and easy to build, pre build wing and fuse with carbon rods already done, great product. Flies like a charm and is a lot of fun, rolls, knife-edge, inverted, prop hanging it's al a breese and quite easy, plane is very forgiving and strong. Make sure your CG is right (95 -100 mm from leading edge). You can easily use a 1300 3S pack it will give a better CG. Had to put 30 grams on mine to get it spot on.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Man, what a lot of fun this EPP plane is, good quality and easy to build, pre build wing and fuse with carbon rods already done, great product. Flies like a charm and is a lot of fun, rolls, knife-edge, inverted, prop hanging it's al a breese and quite easy, plane is very forgiving and strong. Make sure your CG is right (95 -100 mm from leading edge). You can easily use a 1300 3S pack it will give a better CG. Had to put 30 grams on mine to get it spot on.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save