New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

HobbyKing® ™ Mini-GeeBee 3D Aerobatic EPP Airplane w/Motor 700mm (ARF)

HobbyKing® ™ Mini-GeeBee 3D Aerobatic EPP Airplane w/Motor 700mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9095000045-0
WANT FREE SHIPPING? Click here to find out more!

This GeeBee is a great looking EPP profile model and a blast to fly!

The GeeBee 3D can really take a beating thanks to its ultra durable carbon reinforced EPP foam construction. This is great for those unexpected "crash" landings. In most cases the GeeBee will simply bounce off the ground and be ready to fly again straight away.

The GeeBee's large control surfaces allow for anything from sport aerobatics to all out 3D. This makes it a very versatile model that is great for both less experienced and advanced pilots alike. The airframe is extensively reinforced with carbon, making it quite rigid yet still lightweight.

This model is easy to build and includes all necessary hardware. Simply add your own brushless ESC, servos & radio system to complete the kit.

Features:
• Ultra tough EPP foam construction
• 3D aerobatic capable
• Carbon fiber reinforced airframe
• Lightweight design
• Brushless motor included

Specs:
Wingspan: 700mm
Length: 680mm
Flying Weight: 240~250g
Motor: 2206 1500KV brushless outrunner (included)
Propeller: 8040 (included)

Included:
GeeBee 3D Airplane
2206 1500KV brushless motor
Color User Manual
All Necessary Hardware

Required:
4CH transmitter and receiver
10A brushless ESC
4 x 6~8g servo
2S 7.4V 500mAh~3s 11.1v 400mAh lipoly battery

  • SKU 9095000045-0
  • Brand HobbyKing
  • Kapacita ( mAh ) -
  • Hmotnost 740.0000
  • Délka 710.00
  • Packaging Width 70.00
  • Výška 310.00
  • HobbyKing EPP GeeBee
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I installed 500mah battery,removed landing gear,added weight to nose.cut8x4 prop by 1/4 in. Plane pulled to the right in loops; cut slot in fuse behind motor mount, re-aligned motor mount..result..unlimited verticals,completely out of sight,..Lengthed aileron servo arms by one hole,result; does all pattern manuvers on low rate..High rate50 percent more will do anything you can dream up,except snap rolls[too much fuse] extremely fast or extreme slow..will fly in high wind,if you are pilot enough!!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I installed 500mah battery,removed landing gear,added weight to nose.cut8x4 prop by 1/4 in. Plane pulled to the right in loops; cut slot in fuse behind motor mount, re-aligned motor mount..result..unlimited verticals,completely out of sight,..Lengthed aileron servo arms by one hole,result; does all pattern manuvers on low rate..High rate50 percent more will do anything you can dream up,except snap rolls[too much fuse] extremely fast or extreme slow..will fly in high wind,if you are pilot enough!!!!!

I'm a Gee Bee foamy enthusiast. This is a fun, solid plane. It flies as well as the Gee Bee unbreakable, yet is even more solid in its construction. I just flew it last weekend. My flying weight came out to about 230 grams: (2) hs-55 hitech and (2) Spektrum servos, an orange spectrum compatible receiver, and a 10amp speed controller. Overall, it builds so that the center of gravity is at least two centimeters behind the recommendation. With a 500mah battery it flies really well with lots of 3D potentialallowing for the cg to be back a little. I tried out a heavier Flight Max 800mah on it, and that moved the center of gravity up a little but decreased the 3D characteristics. I'm probably going to try it out with the Turnigy 2730 Brushless and the 800mah.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm a Gee Bee foamy enthusiast. This is a fun, solid plane. It flies as well as the Gee Bee unbreakable, yet is even more solid in its construction. I just flew it last weekend. My flying weight came out to about 230 grams: (2) hs-55 hitech and (2) Spektrum servos, an orange spectrum compatible receiver, and a 10amp speed controller. Overall, it builds so that the center of gravity is at least two centimeters behind the recommendation. With a 500mah battery it flies really well with lots of 3D potentialallowing for the cg to be back a little. I tried out a heavier Flight Max 800mah on it, and that moved the center of gravity up a little but decreased the 3D characteristics. I'm probably going to try it out with the Turnigy 2730 Brushless and the 800mah.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save