If you're looking for a mini F3A 3D airplane with great looks and performance, the Mini Saturn is just the plane for you! Constructed from light density EPO foam, this model is ultra-durable yet still lightweight.
The Mini Saturn features massive control surfaces and a large side profile making it ideal for both F3A and 3D flight. The pre-installed 2S brushless power system provides all of the power you need for pulling off extreme aerobatics, while still providing good flight times.
This model is built light. The factory has used a process to produce very light density EPO foam reducing the overall weight by about 30% when compared to standard EPO. They then reinforce the frame with carbon fiber. Because of this, the model flies light with low wing loading, yet still maintains the durability you expect from EPO foam.
This version of the Mini Saturn arrives in "Plug and Fly" form meaning that the servos, motor and ESC are all pre-installed. You will simply need to add your own 4CH radio system and 2S lipoly battery.
• Light density EPO foam construction (30% lighter than standard EPO)
• Powerful brushless 2S power system
• Large control surfaces ideal for aerobatic and 3D flight
• "Plug and Fly" version with motor, ESC and servos
• Easy to build
Flying Weight: 120~140g
Motor: 1306-10 3100KV (included)
ESC: 6A (included)
Servo: 2.5g micro x 3 (included)
Propeller: GWS 6030 (included)
Mini Saturn Airplane (PNF)
All necessary hardware
4CH transmitter and receiver
2S 7.4V 200~300mAh lipoly battery
Hmotnost ( g )
This is a cheaply designed plane. If you are new to the hobby be ready to make many repairs. Motor mounted with 4 ear tabs but nothing to back up the motor. Ears break easily. I had to create my own motor mount after several prop strikes. The aileron linkage is of very thin plastic mine broke. Had to cut a couple servo arms I had and cut/glue them into the aileron. Just know this, while the manual shows replacement parts, there are no replacement parts.Easy and fun build. The plane flies nicely however you need to have good experience in flying, i.e. not for beginners. The landing gear is a bit too week and mine broke on the first hard landing.The use of CF rods forming I section structures makes the model very strong and rigid as well as very light. The battery slot is designed for the Nanotech 300mAh battery. The hatch section receptacle base for the receiver has a U section which fits the curved section of HK's micro stabiliser receiver perfectly! My only real complaint about lack of thought or integration is the use of the Futaba connectors for the servo leads. These are far too lumpy for plane which uses micro everything. The said receiver uses micro JST 1.25mm 3-pin connectors. I'm in the throes of getting micro JSTs to replace the Futabas.
I like the moulded plastic nose cowling. The motor has a shaft which matches the GWS prop fastened with the spinner shaped nut. This creates a smart streamline shape!Although I haven't flown mine yet I must say I really like the design of this model. The demo video by Michael Wargo shows the plane to be a very nice 3D model. It has picked up on many object lessons and much experience in retailing model aircraft by HK over the years. It gets lots of the bits and pieces together and integrates them in a way which bothered HK products many years ago when I started being a customer.
Others have criticised the quality of the servos which I guess I shall see. I have a couple of their Blue Arrow 2.8g servos spare to slot in. More in another posting...
The Mini Saturn is honestly the worst thing I have ever purchased from hobbyking. Nothing on it worked as intended, the pnf installed servos all broke within the first 2 flights and replacements are not only expensive but they were also faulty! Construction was irritatingly fiddly and after all that the plane just didn't perform half as well as expected.
I literally threw it in the bin after 6 months of waiting for parts, attempting repairs, and then being disappointed all over again.
Save up an extra $50 and buy a Durafly Hyperbipe. The quality and performance improvement is well worth the money.Well this plane can fly.. I broke the motor mount and it has been sitting every since. Why?? Because you can't make a motor mount nor buy a motor mount. Why ?? The motor mount is part of base plate of motor itself which makes no sense! So there are no spares absolutely available. The rest of the parts like servos, control rods and stuff can be bought. But the motor mount cannot be found at all.. So not a good idea !Well this plane can fly..
I broke the motor mount and it has been sitting every since. Why??
Because you can't make a motor mount nor buy a motor mount. Why ??
The motor mount is part of base plate of motor itself which makes no sense!
So there are no spares absolutely available. The rest of the parts like servos, control rods and stuff can be bought. But the motor mount cannot be found at all..
So not a good idea !received a plane with the motor locked up, will no turn at all and now I have to jump through hoops and go through the rma dept . UNBELIEVABLESieht hervorragend aus. Die Teile passen perfekt. Besser gehts nicht.
Allein das Design ist fast nicht zu toppen. Bin begeistert was die ugische Kontrolle betrifft. Nach diesem Wochenende sollte der Flieger eingestellt und flugfhig sein. Dann gibt es noch die Flugbewertung.
Looks excellent. The parts fit perfectly. Could not be better.
However, the design is great. My impression well thought out, stable, light. After this weekend i can say more about the flight experiences.
Greetings HeinzThis item support perfect EPO quality and manual instructuion and motor and ESC.
But servo quality is not good. When I received after assemble and setting, rudder server does not working.