The Hobbyking® ™ Rarebear Race Series offers a genuinely cheap, simple, fair and reliable entry level Aero Racing Class using a proven airframe that is tough and flies exceptionally well, this brilliant race series offers the same spec model for the same price no matter where you are in the world!
Almost everything you need to get going is included in this kit and as this is a "standard" no modding class (which keeps the class cheap and promotes close, fair racing) you are guaranteed a competitive plane at the end of assembly! Included in the kit is of course the fantastic Rarebear airframe (with motor installed) which is ready to paint, 3 x HobbyKing® ™ 8g servo's which have excellent centering, torque and speed, a Blue Series 30A ESC which offers not only reliability, it also has all the right connectors pre-soldered for you, 3 x spare props are included to keep you going and finally, a High Performance 4s 45c Turnigy nano-tech Lipoly is included (Which was specifically designed for the Rarebear) to ensure the very best race performance from your plane.
There is no doubt, Aero racing offers adrenalin pumping fun, the thrill of just flying a Rarebear at 100mph+ speeds can only be surpassed by the added thrill of competition. Spares, including the basic airframe are available and prizes are on offer for the winners and runners up. Photos/results from each meeting will be published on the superb new www.hobbykingracing.com website, where you can also find details of where, when and how to enter the fantastic sport of RC Aero Racing via the Rarebear class, look out for a Rarebear series in your country or if you are a race organiser and would like to start a Rarebear racing class, drop us a line on the Contact Us section of the HobbyKing® ™ Racing website and we will help you get started!
• Brilliantly fun and cheap entry level racing
• Genuine 120mph setup in a box!
• Full spares back up Including replacement airframes
• No decals to remove, great for painting
• Powerful Outrunner Motor Pre-Installed
• All Hardware Included and Connectors Pre-Soldered
• Prop & Spinner Included
• Carbon reinforced Wing
• Everything you need to get going (except TX/RX) included
Wing Span: 620mm
Flying weight: 345g
Prop: 5.5x4.5 (3pc Included)
Motor: 2825-1950kv Brushless outrunner motor (Included)
ESC: Hobbyking® ™ Blue series 30A (Included)
Servo: 3 x Hobbyking® ™ 8g /1.2kg / 0.12s (Included)
Lipoly: Turnigy nano-tech 850mAh 4s 45c Lipoly Battery (Included)
Your own 3CH or more Transmitter and Receiver
Lipoly battery charger
The will to win!
Kapacita ( mAh )
Hmotnost ( g )
ordered this kit and I also received the basic kit with nothing...... contacted customer support both live chat and e-mail, took a bit of explaining but once I got my point across. they quickly resolved my issue. instead of sending the kit back, I asked for the parts missing. BOOM! parts arrived in 2 days. Problem solved. Thank You! I give the quality a 1 star because the kit needs to be inspected to insure all items are in box. value for the money is fine. I would have rated overall as a 1, but the service I received was great. So for the staff and support I give this a 5
well I gotta give a horrible review... whys that the plane is awesome... but I ordered one and it came with NOTHING no esc no servos no battery nothing just an airframe.. I got totally ripped off.. and now I gotta jump through all their hoops to fix their screwupPretty good, no way 120 mph out of box, 80 mph yes, not 80mph apart from that it is one fast, excellent flying little plane. A side note to potential buyers make sure you have a high vis paintscheme with good differentiation between top and bottom colours. You will need it, small model, 80 mph speeds, gets small really fast!Received it in good nick, everything held down and nothing loose in the box.
Initial assembly is very quick and easy, however you must be very careful to connect the tail servo linkages before gluing on the tail (Or be prepared to have to very carefully cut off the tail nub then glue it back on). I made a groove on the underside of the vertical stabilizer and put in some carbon rod to take out the large amounts of flex. The one annoying thing was that the servo horns did not stay put in the slots, no matter how much I prepped the surface, they just pulled out. So I upgraded to good ol horns that are held in by two plastic plates and screws. I also sanded most of the foam surface to get rid of the tiny nubs from the moulding process (only because I was going to paint it).
CG is bang on with zippy compact 1000mah 4s, and doesnt require trimming of foam. The 850mah "race spec" battery does require you to scoop out some material to it fits.
ps, for anyone who is considering giving this racer a really nice paint job, dont, stay with something simple and boldGoes great, Esc on 4S is fine, ditch the spinner for an alloy one that's balanced, use an APC 6 x 5.5 prop, ballistic describes it well. Total weight ready to fly 360grams with 4S 850 nano. Paint it with different fluro colours top and bottom to aid with orientation, as it gets really small really quickly. Throughly recommend this one.little pocket rocket! totally ballistic! This thing rocks. Handles very well, seems to hold up to high speed tight turns and will slow down enough for a gentle landing. absolutely CAN NOT beat this for less than a hundo. I used normal spray paint with no problems. Also. don't forget to paint some bright colors on this thing. it gets small very quickly!The kit looks good. cant wait to fly it!Very good quality plane. easy to build and fly's great. remember to attach the Elevator control horn, rob and clevis before you glue the rear parts together .Opened the box today and wow value for money ,what I must add is stick elevator clevis and attach rod before sticking on to fuse as later cannot get access,motor was a bit tight but we shall see if it frees up on running ,have painted this all fluorescent colours as my eyes not as good as use to be ,will post vid on maiden when the weather brightens upToo much fun. If you are on the fence, Buy it! For the money this thing is just outstanding. Get the recommended 4s nanotech 90c too. I used some of the wife's acrylic craft paint to add some stripes and it came out very nice.