New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

HobbyKing™ BL-82910 Digital Brushless Servo HV/MG 11kg / 0.11sec / 56g

HobbyKing™ BL-82910 Digital Brushless Servo HV/MG 11kg / 0.11sec / 56g

Discontinued Product

Please continue searching for a similar product.
SKU:
BL-82910
WANT FREE SHIPPING? Click here to find out more!

The Hobbyking Brushless series use low drain brushless motors for extended motor life and therefore reliability, HV operating voltages also mean this servo can operate directly from a 2s Lipoly Battery, eliminating the need for voltage reduction devices like UBECs and Regulators.

Specs:
Voltage: 6.0v / 7.4v
Speed: 0.13sec/60deg (6.0v) - 0.11sec/60deg (7.4v)
Torque: 8.4kg.cm (6.0v) - 11kg.cm (7.4v)
Size: 40mm x 20mm x 37.5mm
Weight: 56.4g
Gear Train: Full Titanium Alloy
Motor: Brushless
Casing: alloy heatsink Centre
Ball Bearing: 3
Lead: 300mm HD with Universal/JR Plug

  • SKU BL-82910
  • Brand HobbyKing
  • Hmotnost 125.0000
  • Délka 107.00
  • Packaging Width 30.00
  • Výška 72.00
  • Točivý moment ( kg) (min . 0,01 kg ) 11.00
  • Rychlost ( Sec / 60deg ) 0.11
  • A ( mm ) 44.00
  • B ( mm ) 40.00
  • C ( mm ) 40.00
  • D ( mm ) 20.00
  • E ( mm ) 55.00
  • F ( mm ) 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Sorry Hobbyking there is way to much backlash in the gears on the ones I Purchased and when you move the servo arm within the backlash the servo motor does not even try to compensate maybe the deadband has been opened to compensate for poor quality gearing clearances! Was going to replace my Turnigy 1266Hv's in my Trex 700 with these but in comparison these have superior gear tolerances and nearly zero play in them and hold really well. Its pointless having the reliabilty of brushless motor if its let down by the drive train to the servo output arm!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sorry Hobbyking there is way to much backlash in the gears on the ones I Purchased and when you move the servo arm within the backlash the servo motor does not even try to compensate maybe the deadband has been opened to compensate for poor quality gearing clearances! Was going to replace my Turnigy 1266Hv's in my Trex 700 with these but in comparison these have superior gear tolerances and nearly zero play in them and hold really well. Its pointless having the reliabilty of brushless motor if its let down by the drive train to the servo output arm!

I ordered 3 of these based upon the great reviews, and this is what I got:

1 - DOA
1 - major gear slop
1 - OK

I needed 3 for my heli so I had to return all 3 even though one was good. Based on my experience I will not buy these again. They looked promising but with 2 out of 3 being bad I cannot recommend. Maybe it is just my bad luck but I am done.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered 3 of these based upon the great reviews, and this is what I got:

1 - DOA
1 - major gear slop
1 - OK

I needed 3 for my heli so I had to return all 3 even though one was good. Based on my experience I will not buy these again. They looked promising but with 2 out of 3 being bad I cannot recommend. Maybe it is just my bad luck but I am done.

I am starting with a 5 star rating. I have setup 3 of them on the tail of my edge540. The resolution and centering is perfect, speed is great and current draw isn't a concern coming direct from a lipo.
The included arms are a very tight fit which makes for no play I the linkage and control surface. The arms are a little flimsy compared to others, but I trust they are as strong as the servo.
At centre they all are quiet, and no whining from the servo. And into motion or transition they make your standard digital sound and gears sound smooth.

The case feels like quality with a solid feel and gear looks to be titanium as advertised and not copper or brass.

I have not flown yet, waiting for two more for my ailerons. Also have done most setup and testing with 6v, which would provide good enough performance for most setups. But have run direct from a lipo too. I plan to report back with more info and results!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am starting with a 5 star rating. I have setup 3 of them on the tail of my edge540. The resolution and centering is perfect, speed is great and current draw isn't a concern coming direct from a lipo.
The included arms are a very tight fit which makes for no play I the linkage and control surface. The arms are a little flimsy compared to others, but I trust they are as strong as the servo.
At centre they all are quiet, and no whining from the servo. And into motion or transition they make your standard digital sound and gears sound smooth.

The case feels like quality with a solid feel and gear looks to be titanium as advertised and not copper or brass.

I have not flown yet, waiting for two more for my ailerons. Also have done most setup and testing with 6v, which would provide good enough performance for most setups. But have run direct from a lipo too. I plan to report back with more info and results!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!