Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

HobbyKing™ Guppy Mini Slope Glider Balsa 1165mm (KIT)

HobbyKing™ Guppy Mini Slope Glider Balsa 1165mm (KIT)

QTY:

Now save Uložit 0,00 € 0,00 €

40,36 €
Stock:
Váha:
984 g
SKU:
9419000005-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
servo
acc
Popis
produktu

The HobbyKing™ Guppy Mini Slope is a brilliant model perfect for those looking to get into slope gliders! Working with European designer Mitja Erman, the Guppy has been refined into a great slope model available now as a laser cut balsa kit. It has a removable plastic nose cone allowing you to make this a powered model if you so choose.

If you have never built a balsa kit before, the Guppy is simple enough that it can be tackled by just about anyone. The low parts count and build simplicity can't be beat.

To complete the model, you will need CA glue, a roll of covering material, sand paper, hobbyknife a few other assorted tools, plus all your electronics. With the low parts count, the whole airframe can be built in an evening. Spend another evening sanding, another covering, with a fourth evening installing electronics. This means in under a week, you can have a model you created yourself, customized the way you like it.

The HobbyKing™ Guppy Mini Slope kit is a great lighter lift slope model that can still handle the higher winds with ease. As the model can break down easily to fit in a small box, it is easy to pack around, or keep fully assembled for when the winds are right. Also available as a plug and fly, pre built version.

Plug and fly version available here

Features:
• Kit version - includes all laser cut parts, sheeting, and hardware
• Photo illustrated instructions included.
• Super fun, light light slope model
• Designed for slope or can be converted to electric power

Specs:
Wingspan: 1165mm
Length: 710mm
Wing Area: 13.4dm²
Airframe Weight: 180g


Required:
2+ CH transmitter and receiver (micro receiver recommended)
2 x 9g micro servos
4.8~6V receiver battery
UBEC/Voltage regulator (if using 2S lipoly receiver battery)
Covering Material

Product
Specifications

Další informace

  • SKU:
    9419000005-0
  • Brand:
    HobbyKing
  • Hmotnost ( g )
    984.00
  • Délka
    560.00
  • Width:
    200.00
  • Výška:
    280.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
The main downside with this kit is the lack of instructions and plans required to build the kit. The can get away with no plans but the instructions have to be very clear and can not miss out important details. The instructions you receive as part of the kit is a series of pictures which a way to small to see and when there is an important stage the instructional picture is split into 4 even smaller picture that you have no chance of focusing on.

I also received the kit with missing stock balsa for the underside of the glider. If I knew there wouldn't be any then I would not have bought this kit as it would be over priced. This again comes down to poor instructions as I don't have a checklist to check if all the parts are in the box.

You will enjoy the final product but be aware that it is a very small glider. More details on a motor conversion are needed in the kit as it does say it can accommodate a motor. I would also appreciate the layout of the electronics and how to install servos into the wing/fuselage.

I know that people say to expect this from Hobbyking but I have always received great products in the past. This is so close to a five star review, its just the poor instructions that have such a big impact.
Quality
Value
Overall
Quality
Value
Overall
This is a great sloper with a couple of modifications. I read bad reviews about the built kit and it is understandable, when you build it you can do the right modifications. Where the wing attaches to the front of fuselage is to weak, one bad landing and it will break. The nuts for the trailing edge don"t stay glued, all i did was create an index for the wing and use the good ole 2 rods and rubber-band trick. The rear elevator control is tricky, i just bent the wire around the small horn and did my adjustments at the servo. I also attached a motor and folding prop because the weight needed to balance the plane is the same as a motor and ESC so why not!!! I guess what i am saying is you need some experience building. Flying the plane is a dream i love it, has a nice range from slow to fast. This plane has no rudder but you can modify that pretty easy, personally i think you don't need one on this model. Cant wait to fly it again!!
Quality
Value
Overall
Quality
Value
Overall
Overall a good kit. Fast and easy to build.
Biulding the kit:
1. A little skill is required to form the leading edge, wing tips and tail.
2. The wooden pieces for the wing mount nuts are weak - I set these in epoxy putty with a carbon strip under the supplied former with good results. 3. If you are not going to add a motor, form the nose out of balsa. The same goes for the canopy. These are only flimsy plastic.
4. Glue a piece of ply to the fuselage behind the wing to keep it pressed against the forward bulkhead - otherwise, the two tabs that hold the forward part of the wings are easily dislodged.
5. The plane is small, so use a color scheme that makes it easy to see in all directions and inverted. I used clear red on the underside of the wings, tail and fuse, clear yellow on the top of the wings.

Flight:
1. Add weight if it is windy and there is good lift. There is space next to the elevator servo. Make a lead block that fills the whole space and fasten it with a screw through the side of the fuselage.
2. Inverted flying is not very good due to the flat wing bottom.
3. Does not require very much lift in light conditions provided that you keep your speed up.
4. The plane is not very big and is relatively fast, so don't blink when you are doing a fast, low pass.

Overall, a fun and handy little plane
Quality
Value
Overall
Quality
Value
Overall
Overall a good kit. Fast and easy to build.

Biulding the kit:

1. A little skill is required to form the leading edge, wing tips and tail.

2. The wooden pieces for the wing mount nuts are weak - I set these in epoxy putty with a carbon strip under the supplied former with good results. 3. If you are not going to add a motor, form the nose out of balsa. The same goes for the canopy. These are only flimsy plastic.

4. Glue a piece of ply to the fuselage behind the wing to keep it pressed against the forward bulkhead - otherwise, the two tabs that hold the forward part of the wings are easily dislodged.

5. The plane is small, so use a color scheme that makes it easy to see in all directions and inverted. I used clear red on the underside of the wings, tail and fuse, clear yellow on the top of the wings.



Flight:

1. Add weight if it is windy and there is good lift. There is space next to the elevator servo. Make a lead block that fills the whole space and fasten it with a screw through the side of the fuselage.

2. Inverted flying is not very good due to the flat wing bottom.

3. Does not require very much lift in light conditions provided that you keep your speed up.

4. The plane is not very big and is relatively fast, so don't blink when you are doing a fast, low pass.



Overall, a fun and handy little plane
Quality
Value
Overall
Upload
Videos
  • Guppy Balsa Slope Glider

Upload video
Upload
Files

Combine

essential items and
battery
servo
acc

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').